Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

Range of tasks and systems for which the manufacturer recommends the component.

Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.

Permissible installation location of the product: indoors, outdoors, in a technical area, or as part of equipment.

Environmental conditions under which installation and operation of the product are permitted.

Permissible spatial orientation of the component during installation and operation.

Indicates whether the product is supplied assembled by the manufacturer.

Indicates whether the manufacturer performed the specified factory checks or tests before delivery.

External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

Number of independent relay outputs or sets of switching contacts provided by the product.

Contact configurations provided for the product relay outputs.

Number of normally open switching contact sets provided by the relay.

Number of normally closed switching contact sets provided by the relay.

Number of changeover contact sets provided by the relay.

Number of plug-in pins or mating contact positions used between the replaceable relay and its socket or base.

Number of electrical positions or potentials for which the relay socket provides cross-connection capability.

Primary material from which the product is manufactured.

Grade, alloy, class, or technical designation of the product's primary material.

Electrical contact material or contact-material system used by the relay switching contacts.

Profile type of the DIN rail installed in the product or specified for compatible mounting.

Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.

Method used to mechanically secure the product to a support, surface, or load-bearing structure.

Indicates whether the design provides for mounting equipment on a DIN rail.

Indicates whether equipment may be mounted directly to the mounting surface without an intermediate DIN rail.

Indicates whether a separate plug-in base or fixed part is required to install the product.

Manufacturer family, series or interface designation of compatible relay sockets or bases.

Indicates compatibility with a retaining clip used to secure a removable relay or plug-in component in its socket.

Indicates that the socket, retaining clip or module incorporates a mechanical aid for removing the plug-in relay.

Voltage applied to the control circuit to perform the product's intended functions.

Type of current used in the product's control circuit.

Frequency of the alternating voltage or signal in the product's control circuit.

Conductor connection methods supported by the specified terminals or connection elements.

Tightening torque specified by the manufacturer for a screw or bolted terminal connection.

Voltage with reference to which the product's insulation clearances and dielectric properties are specified.

Peak value of an impulse voltage of specified waveform that the product insulation must withstand without breakdown.

Test voltage applied to verify the dielectric strength of the product insulation.

Minimum permissible insulation resistance between the specified electrically separated parts.

Category characterizing the expected level of impulse overvoltages at the product's point of use.

Degree of pollution of the surrounding microenvironment considered when selecting insulation distances and product characteristics.

Type of electrical insulation used, considered in terms of its protective function and construction.

Class of protection against electric shock determined by the product design and protective connection method.

Declared number of mechanical operating cycles that the product can perform without electrical switching load.

Declared number of electrical load-switching cycles under the conditions specified by the manufacturer.

Maximum manufacturer-declared voltage that may be switched by the relay-output contacts.

Maximum manufacturer-declared current that may be switched by the relay-output contacts.

Maximum manufacturer-declared active power that may be switched by the relay-output contacts.

Minimum manufacturer-declared clearance through air between conductive parts at different electrical potentials.

Minimum manufacturer-declared creepage distance along an insulating surface between conductive parts at different electrical potentials.

Minimum conductor cross-section permitted by the connection system within its general conductor-size range.

Maximum conductor cross-section permitted by the connection system within its general conductor-size range.

Minimum conductor stripping length specified by the manufacturer.

Maximum conductor stripping length specified by the manufacturer.

Minimum control-circuit supply voltage supported by the product or electronic coil.

Maximum control-circuit supply voltage supported by the product or electronic coil.

Minimum AC control-circuit frequency supported by the electromagnetic or electronic coil.

Maximum AC control-circuit frequency supported by the electromagnetic or electronic coil.

Operating principle of the relay drive with respect to retention or reset of the switching state.

Indicates whether correct polarity of the DC coil or electronic relay input must be observed.

Manufacturer-declared DC resistance of the relay coil at the stated reference temperature.

Manufacturer-declared tolerance of the relay coil resistance.

Nominal power consumption of the relay coil or electromagnetic drive at rated control voltage.

Nominal current consumed by the relay coil at its rated control voltage.

Maximum pick-up or must-operate voltage expressed as a percentage of the rated coil or control voltage.

Manufacturer-declared time from application of the control signal until the relay reaches its operated switching state.

Manufacturer-declared time from removal of the control signal until the relay returns to its released switching state.

Manufacturer-declared duration of mechanical contact bounce following relay contact operation.

Minimum manufacturer-declared switching voltage for reliable operation of the relay contact.

Minimum manufacturer-declared switching current for reliable relay-contact operation.

Maximum continuous current permitted through a closed relay contact under the manufacturer-declared conditions.

Maximum short-duration inrush current permitted through the relay switching contact.

Maximum AC switching voltage of the relay output contact.

Maximum DC switching voltage of the relay output contact.

Maximum manufacturer-declared AC switching capacity of the relay contacts expressed as apparent power.

Manufacturer-declared electrical resistance of a closed relay switching contact under the specified measurement condition.

Dielectric test voltage applied between the relay coil or control-input circuit and the switching-contact circuit.

Dielectric test voltage applied between electrically isolated relay contact circuits or contact sets.

Indicates that galvanic isolation is provided between the relevant electrical input and output circuits of the product.

Indicates that relay sockets or interface modules support plug-in cross-connections or jumpers between adjacent modules.

IEC 61810 contact-load categories for which the relay contact characteristics or endurance are declared.

Electrical load types for which switching capability or endurance is explicitly declared by the manufacturer.

Manufacturer-declared relay coil inductance with the armature in the operated or energized position.

Manufacturer-declared relay coil inductance with the armature in the released or de-energized position.

Maximum continuous or manufacturer-permitted coil voltage expressed as a percentage of rated coil voltage under the specified conditions.

Physical terminal or lead execution provided directly on the relay body, distinct from the connection technology of a separate relay socket.

Indicates whether the product material is classified as halogen-free according to the characteristics declared by the manufacturer.

Degree of enclosure protection against access to hazardous parts and ingress of solid objects and water, designated by the IP code.

Class of enclosure resistance to external mechanical impacts designated by the IK code.

Method or level of protection of the user against direct contact with hazardous live parts.

Indicates whether the design prevents finger access to hazardous live parts in the intended condition.

Indicates whether the design provides protection against accidental contact with hazardous live parts.

Classification of a material according to its ability to ignite, sustain combustion, and cease burning under a specified test.

Temperature of the heated wire used when testing the material or product against an ignition source.

Indicates that the manufacturer declares safe electrical separation between the relevant input and output circuits.

Indicates that the relevant DC electrical circuit incorporates protection against incorrect or reversed supply polarity.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Maximum permissible average ambient temperature over a consecutive 24-hour period.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Minimum ambient temperature permitted during transportation of the product.

Maximum ambient temperature permitted during transportation of the product.

Indicates whether permissible electrical or thermal loading must be reduced as temperature changes.

Temperature above which the permissible product load must be reduced.

Indicates whether the manufacturer has published the relationship between permissible product load and temperature.

Minimum relative air humidity permitted for the declared operating or test condition.

Maximum relative air humidity permitted for the declared operating or test condition.

Indicates whether the permissible humidity value applies only to non-condensing conditions.

Maximum altitude above sea level at which the product may be installed without exceeding the declared conditions.

Indicates whether the permissible product load must be reduced as installation altitude increases.

Altitude above sea level above which the permissible product load must be reduced.

Indicates whether the product's resistance to vibration has been verified under the declared conditions.

Indicates whether the product's resistance to short-duration mechanical shocks has been verified.

Indicates whether documentation is included in the product's standard supply.

Indicates whether the required plug-in base or fixed part is supplied with the product.

Indicates whether one or more positions or interfaces are provided for identification marking of the product.

Number of separate positions provided on the product for installation or application of identification markings.

Indicates whether a compatible partition or insulating plate can be installed between adjacent terminal blocks or groups of terminal blocks.

Indicates that a retaining clip for the removable relay is supplied with the product.

Number of integrated LEDs used to indicate product status or operating modes.

Indicates whether the product has a local TEST button for the specified functional check of the device.

Number of separate local TEST pushbuttons provided on the product for functional testing of one or more protective functions.

Indicates whether the product has a local visual or mechanical indicator of operating, fault, or end-of-life status.

Types of local visual or mechanical status indication provided by the product design.

Indicates that suppression of the switching overvoltage generated by the control coil is integrated into the product.

Electrical suppression technology integrated in or explicitly supplied with the contactor control coil.

Indicates that the contactor provides a local manual override mechanism in addition to electrical coil operation.

Mechanical structure of an individual switching contact system, for example single, double or bifurcated contact.

Electrical interface functions provided by the relay or relay module between the control circuit and switched circuit.

Indicates that the relay element can be removed and replaced independently of its socket, base or terminal module.

Indicates that the local manual relay test or actuation mechanism can be latched or locked in the operated position.

Indicates that a local indicator shows the presence of relay control or input voltage.

Number or arrangement of electrical contact gaps opened within one switched current path, such as single-break or double-break construction.

Regions or markets for which the manufacturer declares regulatory or certification compliance of the product.

Certification, market-approval, or conformity marks applicable to the product.

Primary normative document or standard according to which the manufacturer classifies or assesses the product.

Additional normative documents and standards declared by the manufacturer as applicable to the product.

Indicates whether an official declaration of conformity is available for the product.

Indicates whether a certificate relating to the declared certification or conformity of the product is available.

Identification number of the certificate relating to the product or its certified version.

Name of the organization that issued the certificate or performed the relevant conformity assessment.

Indicates whether the product was tested by an organization independent of the manufacturer.

Indicates whether the CE marking is applied to the product where applicable.

Indicates whether the UKCA marking is applied to the product where applicable.

Indicates whether the EAC marking is applied to the product where applicable.

Indicates whether the product has a declared UL Listed certification or recognition status.

Indicates whether the product has a declared UL Recognized certification or recognition status.

Indicates whether the cULus mark is applied to the product where applicable.

Indicates whether the product has a declared CSA certification or recognition status.

Indicates whether the product has a declared TÜV certification or recognition status.

Indicates whether the product has a declared VDE certification or recognition status.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Indicates whether the product falls within the scope of WEEE requirements for waste electrical and electronic equipment.

Compliance with applicable IEC 61810-1 general and safety requirements for electromechanical elementary relays.

Compliance with IEC 61810-2 requirements applicable to reliability evaluation of electromechanical elementary relays.

Compliance with applicable IEC 61810-7 test and measurement procedures for electromechanical elementary relays.

Compliance with UL 61810-1 requirements for electromechanical elementary relays.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Mass of the product together with its individual packaging and the accessories included in it.

External horizontal dimension of the product's individual package.

External vertical dimension of the product's individual package.

External depth dimension of the product's individual package.

Design type of the product's individual or transport packaging.

Number of individual products contained in one packaging unit at the specified level.

Country of origin of the goods declared for customs or commercial purposes.

Commodity code under the international Harmonized Commodity Description and Coding System.

Commodity code under the Combined Nomenclature of the European Union.