Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

Range of tasks and systems for which the manufacturer recommends the component.

Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.

Permissible installation location of the product: indoors, outdoors, in a technical area, or as part of equipment.

Environmental conditions under which installation and operation of the product are permitted.

Permissible spatial orientation of the component during installation and operation.

External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

Number of distinct selectable timing operating modes provided by the product.

Number of selectable timing ranges provided by the product.

Number of dedicated external timing-control inputs.

Number of output channels whose switching state is controlled by the selected timing function.

Number of outputs that operate instantaneously rather than according to the configured time delay.

Primary visually perceived colour of the product's external surface.

Designation of the product's primary surface colour according to the RAL colour system.

Type of final surface finish of the product determining its appearance and service properties.

Primary material from which the product is manufactured.

Grade, alloy, class, or technical designation of the product's primary material.

Profile type of the DIN rail installed in the product or specified for compatible mounting.

Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.

Method used to mechanically secure the product to a support, surface, or load-bearing structure.

Indicates whether the design provides for mounting equipment on a DIN rail.

Indicates whether equipment may be mounted directly to the mounting surface without an intermediate DIN rail.

Type of electrical current for which the product's main supply circuit is intended.

AC frequency assigned to the product for normal operating conditions.

Rated external auxiliary supply voltage required for the product's active functions.

Type of current and source used for the product's auxiliary supply.

Conductor connection methods supported by the specified terminals or connection elements.

Tightening torque specified by the manufacturer for a screw or bolted terminal connection.

Voltage with reference to which the product's insulation clearances and dielectric properties are specified.

Peak value of an impulse voltage of specified waveform that the product insulation must withstand without breakdown.

Test voltage applied to verify the dielectric strength of the product insulation.

Minimum permissible insulation resistance between the specified electrically separated parts.

Category characterizing the expected level of impulse overvoltages at the product's point of use.

Degree of pollution of the surrounding microenvironment considered when selecting insulation distances and product characteristics.

Type of electrical insulation used, considered in terms of its protective function and construction.

Class of protection against electric shock determined by the product design and protective connection method.

Manufacturer-declared utilization category defining the load characteristics and switching conditions according to the applicable standard.

Declared number of mechanical operating cycles that the product can perform without electrical switching load.

Declared number of electrical load-switching cycles under the conditions specified by the manufacturer.

Number of independent relay outputs or sets of switching contacts provided by the product.

Contact configurations provided for the product relay outputs.

Functions permanently assigned or assignable to the product relay outputs.

Maximum manufacturer-declared voltage that may be switched by the relay-output contacts.

Maximum manufacturer-declared current that may be switched by the relay-output contacts.

Maximum manufacturer-declared active power that may be switched by the relay-output contacts.

Minimum conductor cross-section permitted by the connection system within its general conductor-size range.

Maximum conductor cross-section permitted by the connection system within its general conductor-size range.

Minimum conductor stripping length specified by the manufacturer.

Maximum conductor stripping length specified by the manufacturer.

Number of normally open switching contact sets provided by the relay.

Number of normally closed switching contact sets provided by the relay.

Number of changeover contact sets provided by the relay.

Mechanical structure of an individual switching contact system, for example single, double or bifurcated contact.

Electrical contact material or contact-material system used by the relay switching contacts.

Minimum manufacturer-declared switching voltage for reliable operation of the relay contact.

Minimum manufacturer-declared switching current for reliable relay-contact operation.

Maximum continuous current permitted through a closed relay contact under the manufacturer-declared conditions.

Maximum short-duration inrush current permitted through the relay switching contact.

Maximum AC switching voltage of the relay output contact.

Maximum DC switching voltage of the relay output contact.

Maximum manufacturer-declared AC switching capacity of the relay contacts expressed as apparent power.

Manufacturer-declared electrical resistance of a closed relay switching contact under the specified measurement condition.

Minimum configurable timing duration supported by the product. Stored in seconds; UI may convert to ms, min, h or days.

Maximum configurable timing duration supported by the product. Stored in seconds; UI may convert to min, h or days.

Smallest manufacturer-supported increment of the configurable timing value.

Manufacturer-declared accuracy of the set timing value, normally expressed relative to the selected range or full-scale value.

Repeat accuracy of the timing function under constant operating and reference conditions.

Change of timing accuracy caused by variation of the supply or control voltage.

Change of timing accuracy per degree of ambient temperature variation.

Minimum manufacturer-declared time required after completion, reset or supply interruption before the timing function can reliably start a new timing cycle.

Duration of a short supply interruption that does not cause unintended loss or restart of the active timing operation.

Electrical interface type accepted by the dedicated timing-control input.

Minimum duration of an external timing-control signal required for reliable recognition.

Maximum manufacturer-declared cable length for the external timing-control input. Stored in mm; UI may display metres.

Manufacturer-declared nominal or fixed dead time between deactivation of the star output and activation of the delta output.

Minimum configurable dead time between switching from star to delta.

Maximum configurable dead time between switching from star to delta.

Manufacturer-declared absolute tolerance of the star-delta transition dead time.

Functional contact topology used to provide the dedicated star and delta control outputs.

Manufacturer-declared electrical power consumption while the product is energized but not actively switching the controlled load.

Indicates whether the product material is classified as halogen-free according to the characteristics declared by the manufacturer.

Degree of enclosure protection against access to hazardous parts and ingress of solid objects and water, designated by the IP code.

Class of enclosure resistance to external mechanical impacts designated by the IK code.

Method or level of protection of the user against direct contact with hazardous live parts.

Indicates whether the design prevents finger access to hazardous live parts in the intended condition.

Indicates whether the design provides protection against accidental contact with hazardous live parts.

Classification of a material according to its ability to ignite, sustain combustion, and cease burning under a specified test.

Temperature of the heated wire used when testing the material or product against an ignition source.

Indicates that galvanic isolation is provided between the relevant electrical input and output circuits of the product.

Indicates that the timing/output logic prevents simultaneous activation of the star and delta control outputs.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Maximum permissible average ambient temperature over a consecutive 24-hour period.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Minimum ambient temperature permitted during transportation of the product.

Maximum ambient temperature permitted during transportation of the product.

Indicates whether permissible electrical or thermal loading must be reduced as temperature changes.

Temperature above which the permissible product load must be reduced.

Indicates whether the manufacturer has published the relationship between permissible product load and temperature.

Minimum relative air humidity permitted for the declared operating or test condition.

Maximum relative air humidity permitted for the declared operating or test condition.

Indicates whether the permissible humidity value applies only to non-condensing conditions.

Maximum altitude above sea level at which the product may be installed without exceeding the declared conditions.

Indicates whether the permissible product load must be reduced as installation altitude increases.

Altitude above sea level above which the permissible product load must be reduced.

Indicates whether the product's resistance to vibration has been verified under the declared conditions.

Indicates whether the product's resistance to short-duration mechanical shocks has been verified.

Indicates whether documentation is included in the product's standard supply.

Indicates whether an installation manual is included with the product.

Indicates whether a terminal diagram is included with the product.

Number of integrated LEDs used to indicate product status or operating modes.

Indicates whether the product has a local visual or mechanical indicator of operating, fault, or end-of-life status.

Types of local visual or mechanical status indication provided by the product design.

Indicates that a dedicated external input is provided for control of timing operation independently of the normal supply terminals.

Timing operating functions supported by the product, such as ON-delay, OFF-delay, interval, flasher or star-delta timing.

Methods supported for setting the actual timing value within the selected timing range.

Methods supported for selecting the timing scale or timing range.

Indicates that elapsed timing state or timing progress can be retained across a supply interruption rather than being unconditionally reset.

Functions that can be performed through the external timing-control input.

Indicates that outputs can be configured as timed, instantaneous or assigned differently depending on the selected operating function.

Sources or events capable of starting the timing sequence.

Signal-transition or level-sensitive trigger modes supported for starting or controlling the timing sequence.

Indicates that the timing trigger mode can be selected or configured by the user.

Supported responses when another valid trigger is received while a timing period is already active.

Indicates that the dead time between star-output deactivation and delta-output activation can be adjusted by the user.

Regions or markets for which the manufacturer declares regulatory or certification compliance of the product.

Certification, market-approval, or conformity marks applicable to the product.

Primary normative document or standard according to which the manufacturer classifies or assesses the product.

Additional normative documents and standards declared by the manufacturer as applicable to the product.

Indicates whether an official declaration of conformity is available for the product.

Indicates whether a certificate relating to the declared certification or conformity of the product is available.

Identification number of the certificate relating to the product or its certified version.

Name of the organization that issued the certificate or performed the relevant conformity assessment.

Indicates whether the product was tested by an organization independent of the manufacturer.

Indicates whether the CE marking is applied to the product where applicable.

Indicates whether the UKCA marking is applied to the product where applicable.

Indicates whether the EAC marking is applied to the product where applicable.

Indicates whether the product has a declared UL Listed certification or recognition status.

Indicates whether the product has a declared UL Recognized certification or recognition status.

Indicates whether the cULus mark is applied to the product where applicable.

Indicates whether the product has a declared CSA certification or recognition status.

Indicates whether the product has a declared TÜV certification or recognition status.

Indicates whether the product has a declared VDE certification or recognition status.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Indicates whether the product falls within the scope of WEEE requirements for waste electrical and electronic equipment.

Compliance with applicable IEC 61812-1 requirements for time relays and coupling relays for industrial and residential use.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Mass of the product together with its individual packaging and the accessories included in it.

External horizontal dimension of the product's individual package.

External vertical dimension of the product's individual package.

External depth dimension of the product's individual package.

Design type of the product's individual or transport packaging.

Number of individual products contained in one packaging unit at the specified level.

Country of origin of the goods declared for customs or commercial purposes.

Commodity code under the international Harmonized Commodity Description and Coding System.

Commodity code under the Combined Nomenclature of the European Union.