Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

Range of tasks and systems for which the manufacturer recommends the component.

Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.

Permissible installation location of the product: indoors, outdoors, in a technical area, or as part of equipment.

Environmental conditions under which installation and operation of the product are permitted.

Permissible spatial orientation of the component during installation and operation.

External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Number of integrated physical RS-485 communication interfaces.

Number of physical serial ports that can be configured for more than one electrical serial standard.

Primary material from which the product is manufactured.

Grade, alloy, class, or technical designation of the product's primary material.

Primary visually perceived colour of the product's external surface.

Designation of the product's primary surface colour according to the RAL colour system.

Type of final surface finish of the product determining its appearance and service properties.

Technological surface treatment applied to modify its protective, mechanical, or decorative properties.

Type of protective, functional, or decorative coating applied to the surface.

Material or chemical basis of the coating applied to the surface of the product or one of its parts.

Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.

Method used to mechanically secure the product to a support, surface, or load-bearing structure.

Type of surface or supporting base to which the product may be fixed.

Number of holes provided in the product for mechanical fixing.

Diameter of the hole provided for a fixing element used when mounting the product.

Geometric shape of the hole intended for mechanical fixing of the product.

Distance between the centres of mounting holes in the horizontal direction.

Profile type of the DIN rail installed in the product or specified for compatible mounting.

Distance between the centres of mounting holes in the vertical direction.

Horizontal dimension of the mounting pattern between the outermost fixing points of the product.

Vertical dimension of the mounting pattern between the outermost fixing points of the product.

Size designation of the screw, bolt, or other threaded fastener used for mounting the product.

Designation of the thread provided in the product's mounting holes or fixing elements.

Tightening torque recommended or permitted for fasteners during product installation.

Indicates whether the required fasteners are included with the product.

Type of electrical current for which the product's main supply circuit is intended.

Voltage value assigned to the product by the manufacturer for specified application conditions and characteristics.

Rated RMS value of alternating voltage assigned to the product by the manufacturer.

Rated direct voltage assigned to the product by the manufacturer.

Maximum voltage at which continuous operation of the product is permitted under the conditions declared by the manufacturer.

Minimum voltage at which the manufacturer guarantees the intended operating mode of the product.

AC frequency assigned to the product for normal operating conditions.

Supported serial communication baud rates for interfaces such as RS-232, RS-422, RS-485 or equivalent serial buses.

Supported data-word lengths for serial communication.

Parity modes supported by the serial communication interface.

Supported number of stop bits in serial communication frames.

Minimum configurable logical address on a supported serial communication network.

Maximum configurable logical address on a supported serial communication network.

Connector types used for RS-232, RS-422, RS-485 or comparable serial communication interfaces.

Hardware or software flow-control modes supported by serial interfaces.

Maximum manufacturer-supported serial communication cable length under the declared conditions.

Indicates galvanic isolation between the serial communication interface and relevant internal circuitry.

Two-wire or four-wire electrical operating modes supported by the RS-485 interface.

Maximum number of RS-485 nodes supported on one manufacturer-declared bus segment.

Electrical serial interface standards selectable on configurable serial ports.

Degree of enclosure protection against access to hazardous parts and ingress of solid objects and water, designated by the IP code.

Class of enclosure resistance to external mechanical impacts designated by the IK code.

Mechanical impact energy that the product or enclosure can withstand in the specified test.

Enclosure type or rating under the NEMA system characterizing the conditions and types of external influences against which protection is provided.

Indicates whether the declared ingress protection of the enclosure has been verified by certification or testing.

Manufacturer-declared dielectric test voltage associated with serial-interface isolation.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Minimum ambient temperature permitted during transportation of the product.

Maximum ambient temperature permitted during transportation of the product.

Minimum ambient temperature at which the manufacturer permits installation of the product.

Maximum ambient temperature at which the manufacturer permits installation of the product.

Minimum relative air humidity permitted for the declared operating or test condition.

Maximum relative air humidity permitted for the declared operating or test condition.

Indicates whether the permissible humidity value applies only to non-condensing conditions.

Maximum altitude above sea level at which the product may be installed without exceeding the declared conditions.

Minimum altitude relative to sea level for which the manufacturer specifies permissible installation conditions.

Indicates whether the permissible product load must be reduced as installation altitude increases.

Indicates whether the product's resistance to vibration has been verified under the declared conditions.

Indicates whether the product's resistance to short-duration mechanical shocks has been verified.

Indicates whether the product supports digital data exchange with external devices or systems.

List of supported digital data communication protocols.

List of supported physical or logical digital communication interfaces.

Indicates that the logical device or slave address used by a serial communication protocol can be configured.

Indicates that loss or inactivity of a communication link can be detected by an internal communication watchdog.

Indicates that the timeout used to detect communication loss or inactivity can be configured.

Minimum configurable communication timeout.

Maximum configurable communication timeout.

Indicates that loss of an expected communication connection can generate a local or remote alarm or diagnostic condition.

Indicates that communication activity or communication health statistics can be read for diagnostic purposes.

Indicates that communication errors can be accumulated and read through the product diagnostics.

Indicates that bus termination can be applied to the RS-485 interface.

Indicates that an RS-485 termination resistor is integrated into the product.

Nominal resistance of the integrated or manufacturer-declared RS-485 bus termination.

Indicates support for bias resistors used to establish a defined idle state on the RS-485 bus.

Indicates integrated or manufacturer-supported fail-safe biasing for a defined RS-485 idle state.

Indicates that communication-interface faults, states or network conditions can be diagnosed by the product.

Regions or markets for which the manufacturer declares regulatory or certification compliance of the product.

Certification, market-approval, or conformity marks applicable to the product.

Primary normative document or standard according to which the manufacturer classifies or assesses the product.

Additional normative documents and standards declared by the manufacturer as applicable to the product.

Indicates whether an official declaration of conformity is available for the product.

Indicates whether a separate manufacturer declaration concerning declared product characteristics or conformity is available.

Indicates whether a certificate relating to the declared certification or conformity of the product is available.

Identification number of the certificate relating to the product or its certified version.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Indicates whether the product falls within the scope of WEEE requirements for waste electrical and electronic equipment.

Mass of the product together with its individual packaging and the accessories included in it.

External horizontal dimension of the product's individual package.

External vertical dimension of the product's individual package.

External depth dimension of the product's individual package.

Design type of the product's individual or transport packaging.

Number of individual products contained in one packaging unit at the specified level.

Country of origin of the goods declared for customs or commercial purposes.

Country in which the product was manufactured or its principal manufacturing operation was performed.

Commodity code under the international Harmonized Commodity Description and Coding System.

Commodity code under the Combined Nomenclature of the European Union.