Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

Range of tasks and systems for which the manufacturer recommends the component.

Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.

Permissible installation location of the product: indoors, outdoors, in a technical area, or as part of equipment.

Environmental conditions under which installation and operation of the product are permitted.

Permissible spatial orientation of the component during installation and operation.

External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Number of integrated physical Ethernet communication ports.

Maximum total number of simultaneous CIP connections supported by the product.

Maximum number of simultaneous implicit EtherNet/IP I/O connections.

Maximum number of simultaneous TCP connections available to EtherNet/IP communication services.

Number of physical KNX bus connection points provided by the product.

Maximum number of KNX telegrams that can be buffered internally.

Maximum number of group-address filtering entries supported by the KNX coupler or router.

Maximum number of simultaneous KNXnet/IP tunneling connections supported by the product.

Primary material from which the product is manufactured.

Grade, alloy, class, or technical designation of the product's primary material.

Primary visually perceived colour of the product's external surface.

Designation of the product's primary surface colour according to the RAL colour system.

Type of final surface finish of the product determining its appearance and service properties.

Technological surface treatment applied to modify its protective, mechanical, or decorative properties.

Type of protective, functional, or decorative coating applied to the surface.

Material or chemical basis of the coating applied to the surface of the product or one of its parts.

Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.

Method used to mechanically secure the product to a support, surface, or load-bearing structure.

Type of surface or supporting base to which the product may be fixed.

Number of holes provided in the product for mechanical fixing.

Diameter of the hole provided for a fixing element used when mounting the product.

Geometric shape of the hole intended for mechanical fixing of the product.

Distance between the centres of mounting holes in the horizontal direction.

Profile type of the DIN rail installed in the product or specified for compatible mounting.

Distance between the centres of mounting holes in the vertical direction.

Horizontal dimension of the mounting pattern between the outermost fixing points of the product.

Vertical dimension of the mounting pattern between the outermost fixing points of the product.

Size designation of the screw, bolt, or other threaded fastener used for mounting the product.

Designation of the thread provided in the product's mounting holes or fixing elements.

Tightening torque recommended or permitted for fasteners during product installation.

Indicates whether the required fasteners are included with the product.

Type of electrical current for which the product's main supply circuit is intended.

Voltage value assigned to the product by the manufacturer for specified application conditions and characteristics.

Rated RMS value of alternating voltage assigned to the product by the manufacturer.

Rated direct voltage assigned to the product by the manufacturer.

Maximum voltage at which continuous operation of the product is permitted under the conditions declared by the manufacturer.

Minimum voltage at which the manufacturer guarantees the intended operating mode of the product.

AC frequency assigned to the product for normal operating conditions.

Supported nominal Ethernet physical-layer link speeds.

Physical transmission media supported by the Ethernet interfaces.

Physical connector types provided or supported for Ethernet communication.

Ethernet half-duplex and full-duplex operating modes supported by the interface.

Indicates automatic detection and correction of straight-through or crossover copper Ethernet wiring.

Maximum manufacturer-supported Ethernet cable length for the declared physical interface. Stored in millimetres; UI may display metres.

Packet-forwarding architectures supported by the integrated Ethernet switch.

Indicates support for a manufacturer-approved Ethernet network redundancy mechanism.

Network redundancy and rapid-recovery protocols supported by the Ethernet interface or integrated switch.

Indicates local indication of Ethernet physical-link status.

Indicates local indication of Ethernet transmit or receive activity.

Indicates support for copying traffic from one or more Ethernet ports to a monitoring port.

Indicates support for Ethernet frames larger than the standard frame size.

Maximum Ethernet frame size supported by the interface or integrated switch.

Minimum manufacturer-declared KNX bus operating voltage.

Maximum manufacturer-declared KNX bus operating voltage.

Mean or manufacturer-declared current drawn by the device from the KNX bus.

Maximum manufacturer-declared KNX telegram processing or forwarding rate.

Degree of enclosure protection against access to hazardous parts and ingress of solid objects and water, designated by the IP code.

Class of enclosure resistance to external mechanical impacts designated by the IK code.

Mechanical impact energy that the product or enclosure can withstand in the specified test.

Enclosure type or rating under the NEMA system characterizing the conditions and types of external influences against which protection is provided.

Indicates whether the declared ingress protection of the enclosure has been verified by certification or testing.

Indicates galvanic isolation between the Ethernet physical interface and relevant internal circuitry.

Manufacturer-declared dielectric test voltage associated with Ethernet interface isolation.

Indicates that KNXnet/IP tunneling can use KNX IP Secure protection.

Indicates support for secure KNXnet/IP routing.

Indicates support for KNX IP Secure communication on the KNX IP medium.

Indicates support for KNX Data Secure end-to-end protection of applicable KNX group communication.

Indicates support for manufacturer-declared KNX Secure commissioning procedures.

Indicates use or support of a KNX device certificate for secure commissioning or secure device integration.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Minimum ambient temperature permitted during transportation of the product.

Maximum ambient temperature permitted during transportation of the product.

Minimum ambient temperature at which the manufacturer permits installation of the product.

Maximum ambient temperature at which the manufacturer permits installation of the product.

Minimum relative air humidity permitted for the declared operating or test condition.

Maximum relative air humidity permitted for the declared operating or test condition.

Indicates whether the permissible humidity value applies only to non-condensing conditions.

Maximum altitude above sea level at which the product may be installed without exceeding the declared conditions.

Minimum altitude relative to sea level for which the manufacturer specifies permissible installation conditions.

Indicates whether the permissible product load must be reduced as installation altitude increases.

Indicates whether the product's resistance to vibration has been verified under the declared conditions.

Indicates whether the product's resistance to short-duration mechanical shocks has been verified.

Indicates that a KNX bus coupling unit or equivalent KNX interface is integrated into the product.

Indicates presence of a local KNX programming or physical-address button.

Indicates presence of a dedicated KNX programming status LED.

Indicates presence of one or more indicators for KNX bus or communication status.

Indicates whether the product supports digital data exchange with external devices or systems.

List of supported digital data communication protocols.

List of supported physical or logical digital communication interfaces.

Supported methods for assigning network-layer addresses to the Ethernet interface.

Indicates support for Internet Protocol version 6 communication.

Indicates that communication activity or communication health statistics can be read for diagnostic purposes.

Indicates that communication errors can be accumulated and read through the product diagnostics.

Indicates support for IEEE Ethernet automatic negotiation of link parameters.

Indicates diagnostic monitoring of individual Ethernet ports and link states.

Indicates that traffic or error statistics are available for individual Ethernet ports.

Indicates that communication-interface faults, states or network conditions can be diagnosed by the product.

EtherNet/IP Scanner, Adapter and explicit-message communication roles supported by the product.

Indicates support for CIP explicit request-response messaging over EtherNet/IP.

Indicates support for cyclic or real-time CIP I/O connections over EtherNet/IP.

Indicates support for multicast transport of applicable EtherNet/IP I/O data.

Indicates that a manufacturer-provided EtherNet/IP EDS device-description file is available.

KNX physical or network media supported by the product.

Indicates that the product can be configured or commissioned using KNX ETS.

Minimum KNX ETS version declared by the manufacturer for configuration or commissioning.

Indicates that a manufacturer-provided KNX product database or KNX product file is available.

Indicates support for KNX telegram filtering using a group-address filter table.

Indicates that KNX telegram filter-table behavior can be configured through the supported engineering environment.

Telegram forwarding and filtering modes supported by the KNX line or backbone coupler.

Indicates that the device can operate as a KNX line repeater where supported.

Indicates support for operation as a KNX line coupler.

Indicates support for operation as a KNX backbone coupler.

Indicates support for KNXnet/IP tunneling communication.

Indicates support for KNXnet/IP routing between KNX IP and other KNX network segments.

Indicates support for multicast transport used by KNXnet/IP routing.

Indicates that the multicast address used for KNXnet/IP routing can be configured.

Indicates support for KNX IP communication through applicable NAT environments.

Indicates support for KNXnet/IP discovery services.

Indicates that the device can provide an IP-based programming or commissioning interface for KNX.

Indicates support for monitoring KNX bus communication through the IP interface.

Indicates configurable filtering of telegrams forwarded between KNX IP and connected KNX media.

Regions or markets for which the manufacturer declares regulatory or certification compliance of the product.

Certification, market-approval, or conformity marks applicable to the product.

Primary normative document or standard according to which the manufacturer classifies or assesses the product.

Additional normative documents and standards declared by the manufacturer as applicable to the product.

Indicates whether an official declaration of conformity is available for the product.

Indicates whether a separate manufacturer declaration concerning declared product characteristics or conformity is available.

Indicates whether a certificate relating to the declared certification or conformity of the product is available.

Identification number of the certificate relating to the product or its certified version.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Indicates whether the product falls within the scope of WEEE requirements for waste electrical and electronic equipment.

Mass of the product together with its individual packaging and the accessories included in it.

External horizontal dimension of the product's individual package.

External vertical dimension of the product's individual package.

External depth dimension of the product's individual package.

Design type of the product's individual or transport packaging.

Number of individual products contained in one packaging unit at the specified level.

Country of origin of the goods declared for customs or commercial purposes.

Country in which the product was manufactured or its principal manufacturing operation was performed.

Commodity code under the international Harmonized Commodity Description and Coding System.

Commodity code under the Combined Nomenclature of the European Union.