Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

Range of tasks and systems for which the manufacturer recommends the component.

Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.

Permissible installation location of the product: indoors, outdoors, in a technical area, or as part of equipment.

Environmental conditions under which installation and operation of the product are permitted.

Permissible spatial orientation of the component during installation and operation.

Indicates that the installed runtime software version can be read from the device.

Operator-interface languages supported by the HMI runtime.

Indicates that the operator can change the active interface language during runtime.

Scripting languages supported by the runtime or engineering environment.

Indicates that the HMI runtime can start automatically after device startup.

External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Physical width of the active display area.

Physical height of the active display area.

Maximum number of event records that can be stored in the product's internal log.

Number of integrated physical Ethernet communication ports.

Number of integrated physical RS-485 communication interfaces.

Number of integrated physical USB ports provided by the product, including charging, data, communication or programming ports.

Maximum number of simultaneous OPC UA Client sessions accepted by the integrated OPC UA Server.

Maximum total number of active OPC UA Subscriptions supported by the integrated Server.

Maximum total number of OPC UA MonitoredItems supported by the Server.

Maximum number of OPC UA namespaces supported or exposed by the implementation where declared.

Maximum number of MQTT broker connections that can be configured or maintained simultaneously.

Maximum number of MQTT topics configured for publishing data.

Maximum number of simultaneous MQTT subscriptions supported or configurable.

Maximum number of MQTT application messages retained in the manufacturer-defined local offline buffer.

Maximum number of simultaneously representable display colors.

Number of physical HMI function keys.

Number of physical function keys whose application behavior can be configured.

Number of physical HMI function keys with integrated indication or illumination.

Number of dedicated physical navigation or system keys provided by the HMI.

Number of integrated LEDs whose indication behavior can be assigned by the HMI application.

Maximum number of HMI touch or physical controls that can be exposed as direct process-control inputs where supported.

Maximum manufacturer-declared memory available for the HMI visualization project.

Maximum number of visualization screens supported in one HMI project.

Maximum number of popup or dialog screens supported by one HMI project.

Maximum number of reusable visualization screen templates supported.

Maximum number of visualization objects supported in one project where manufacturer-declared.

Maximum total number of HMI runtime tags or variables supported by the product.

Maximum number of internal HMI runtime tags not directly connected to an external controller.

Maximum number of HMI tags linked to external automation devices.

Maximum number of simultaneous automation-controller communication connections supported by the HMI runtime.

Maximum number of communication drivers usable in one HMI project.

Maximum number of operator-interface languages that can be included in one HMI project.

Maximum number of recipe definitions supported by one runtime project.

Maximum total number of recipe data records supported.

Maximum number of variables or parameters contained in one recipe definition.

Maximum number of configured alarm messages supported by the runtime project.

Maximum number of configurable alarm classes.

Number of alarm priority levels supported by the runtime.

Maximum number of process-value curves supported in a trend visualization.

Maximum number of independently configured data-logging groups.

Maximum number of process tags that can be archived by the runtime data logger.

Maximum number of user-defined scripts supported in one project.

Maximum number of simultaneous web visualization client sessions supported.

Maximum number of simultaneous VNC client connections supported by the device.

Maximum number of simultaneous remote clients permitted to operate the HMI.

Maximum number of simultaneous view-only remote HMI clients.

Maximum number of configured user accounts supported by the product.

Maximum number of configurable user roles supported.

Maximum number of configurable user groups supported.

Primary material from which the product is manufactured.

Grade, alloy, class, or technical designation of the product's primary material.

Primary visually perceived colour of the product's external surface.

Designation of the product's primary surface colour according to the RAL colour system.

Type of final surface finish of the product determining its appearance and service properties.

Technological surface treatment applied to modify its protective, mechanical, or decorative properties.

Type of protective, functional, or decorative coating applied to the surface.

Material or chemical basis of the coating applied to the surface of the product or one of its parts.

Maximum angle permitted by the manufacturer by which the product may deviate from the specified reference orientation during installation.

Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.

Method used to mechanically secure the product to a support, surface, or load-bearing structure.

Type of surface or supporting base to which the product may be fixed.

Type of electrical current for which the product's main supply circuit is intended.

Voltage value assigned to the product by the manufacturer for specified application conditions and characteristics.

Rated RMS value of alternating voltage assigned to the product by the manufacturer.

Rated direct voltage assigned to the product by the manufacturer.

Maximum voltage at which continuous operation of the product is permitted under the conditions declared by the manufacturer.

Minimum voltage at which the manufacturer guarantees the intended operating mode of the product.

AC frequency assigned to the product for normal operating conditions.

Supported nominal Ethernet physical-layer link speeds.

Manufacturer-declared maximum or nominal display luminance.

Indicates that display brightness or backlight intensity can be adjusted.

Minimum configurable display brightness level expressed as a percentage of maximum brightness.

Maximum configurable display brightness level expressed as a percentage.

Manufacturer-declared display contrast ratio expressed as ratio to one.

Maximum manufacturer-declared display viewing angle from the top direction.

Maximum manufacturer-declared display viewing angle from the bottom direction.

Maximum manufacturer-declared display viewing angle from the left direction.

Maximum manufacturer-declared display viewing angle from the right direction.

Indicates that display brightness can be adjusted automatically according to ambient conditions.

Degree of enclosure protection against access to hazardous parts and ingress of solid objects and water, designated by the IP code.

Class of enclosure resistance to external mechanical impacts designated by the IK code.

Mechanical impact energy that the product or enclosure can withstand in the specified test.

Enclosure type or rating under the NEMA system characterizing the conditions and types of external influences against which protection is provided.

Indicates whether the declared ingress protection of the enclosure has been verified by certification or testing.

Indicates that access to network, web, API or remote configuration functions can require authenticated user credentials.

Indicates support for encrypted data communication through one or more manufacturer-supported communication services.

Transport Layer Security protocol versions supported for protected network communication.

Indicates that user permissions can be differentiated by user role or authorization level.

Indicates that security-relevant events such as authentication failures or configuration access can be recorded.

Indicates that the device verifies the integrity or authenticity of executable firmware during startup.

Indicates that firmware update packages are cryptographically authenticated before installation.

OPC UA MessageSecurityMode values supported by the product.

OPC UA security policies supported for establishing secure communication.

Indicates support for OPC UA application instance certificates for secure communication.

Indicates support for OPC UA PubSub message security mechanisms.

Ingress protection rating applicable specifically to the installed front face of the product.

Ingress protection rating applicable specifically to the rear portion of the installed product.

NEMA enclosure rating applicable specifically to the installed front face of the HMI.

User authentication mechanisms supported by the product.

Indicates that password length, complexity, expiry or similar security rules can be configured.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Minimum ambient temperature permitted during transportation of the product.

Maximum ambient temperature permitted during transportation of the product.

Minimum ambient temperature at which the manufacturer permits installation of the product.

Maximum ambient temperature at which the manufacturer permits installation of the product.

Minimum relative air humidity permitted for the declared operating or test condition.

Maximum relative air humidity permitted for the declared operating or test condition.

Indicates whether the permissible humidity value applies only to non-condensing conditions.

Maximum altitude above sea level at which the product may be installed without exceeding the declared conditions.

Minimum altitude relative to sea level for which the manufacturer specifies permissible installation conditions.

Indicates whether the permissible product load must be reduced as installation altitude increases.

Indicates whether the product's resistance to vibration has been verified under the declared conditions.

Indicates whether the product's resistance to short-duration mechanical shocks has been verified.

Technology used to provide display backlighting.

Manufacturer-declared backlight lifetime or MTBF under specified conditions.

Indicates that the display backlight can be replaced as a service component.

Touch sensing technology used by the integrated HMI touchscreen.

Indicates simultaneous detection of multiple independent touch points.

Maximum number of simultaneous touchscreen contact points supported.

Manufacturer-declared maximum touch-position error expressed relative to the active touch area.

Manufacturer-declared optical light transmission through the touchscreen layer.

Manufacturer-declared minimum number of touchscreen activations.

Indicates that touchscreen position calibration can be performed.

Indicates support for gesture-based touchscreen interaction.

Indicates a touchscreen operating mode intended to suppress unintended input caused by water or liquid on the surface.

Indicates that an audible buzzer is integrated into the HMI.

Indicates that touchscreen input can be temporarily disabled for cleaning, servicing or process safety purposes.

Indicates that touchscreen operation can generate audible feedback.

Indicates whether a data-logging function is provided for recording supported measurements, states, or process parameters.

Indicates whether the product can store an internal event log.

Indicates whether the product supports digital data exchange with external devices or systems.

List of supported digital data communication protocols.

List of supported physical or logical digital communication interfaces.

Indicates whether an integrated web server or web interface is provided for access to product functions.

Indicates whether specified product settings can be read or changed remotely through a supported communication interface.

Indicates whether diagnostic information, status data, or fault information can be obtained remotely.

Indicates that device firmware can be updated by a manufacturer-supported procedure.

Indicates that device parameters and configuration data can be backed up to an external system or supported storage medium.

Indicates that previously stored device parameters or configuration data can be restored to the product.

Indicates that stored events, warnings or faults can include a date and/or time stamp.

Indicates that the internal clock can be synchronized from an external radio, satellite, network or other reference time source.

External reference systems supported for automatic clock synchronization.

Supported methods for assigning network-layer addresses to the Ethernet interface.

Indicates support for Internet Protocol version 6 communication.

Indicates that measured or logged data can be transmitted automatically without an explicit polling request.

Indicates manufacturer-supported communication with a cloud or remote Internet service.

Indicates that measurement, status or configuration data can be accessed through a documented application programming interface.

Application programming interface types supported by the product or its integrated communication service.

Indicates that firmware can be updated through a supported local or remote data communication interface.

Indicates that loss or inactivity of a communication link can be detected by an internal communication watchdog.

Indicates that the timeout used to detect communication loss or inactivity can be configured.

Minimum configurable communication timeout.

Maximum configurable communication timeout.

Indicates that loss of an expected communication connection can generate a local or remote alarm or diagnostic condition.

Indicates that communication activity or communication health statistics can be read for diagnostic purposes.

Indicates that communication errors can be accumulated and read through the product diagnostics.

Indicates that communication-interface faults, states or network conditions can be diagnosed by the product.

OPC UA Client and Server application roles supported by the product.

Network transports supported for OPC UA Client/Server communication.

OPC UA user identity token types accepted or supported by the product.

Indicates that trusted and rejected OPC UA application certificates can be managed.

Indicates support for integration with an OPC UA Global Discovery Server or certificate-management infrastructure.

Maximum number of OPC UA Subscriptions supported within one Session.

Maximum number of OPC UA MonitoredItems supported within one Subscription.

Minimum manufacturer-supported sampling interval for OPC UA MonitoredItems.

Minimum manufacturer-supported publishing interval for OPC UA Subscriptions.

Indicates support for OPC UA durable Subscriptions that can persist through extended communication interruptions.

Indicates support for transferring applicable OPC UA Subscriptions between Sessions.

Indicates support for OPC UA event notifications.

Indicates support for the OPC UA Alarms and Conditions information model or corresponding functionality.

Indicates support for OPC UA access to historical process or variable data.

Indicates support for OPC UA access to historical events.

Indicates support for calling or exposing OPC UA Methods.

Indicates support for OPC UA Reverse Connect communication.

Indicates support for OPC UA server or endpoint discovery functionality.

Indicates support for the OPC UA Publish-Subscribe communication model.

OPC UA PubSub Publisher and Subscriber roles supported by the product.

Transport and message mappings supported for OPC UA PubSub communication.

Indicates support for manufacturer-declared OPC UA server, session, subscription or communication diagnostics.

MQTT protocol versions supported by the product.

MQTT Publisher, Subscriber or Broker roles supported by the product.

MQTT Quality of Service delivery levels supported by the product.

Indicates that the MQTT Keep Alive interval can be configured.

Minimum configurable MQTT Keep Alive interval.

Maximum configurable MQTT Keep Alive interval.

Indicates support for publishing or receiving MQTT retained messages.

Indicates support for MQTT Will Message configuration.

Indicates support for preserving applicable MQTT session state across network reconnections.

Indicates that the MQTT session expiry duration can be configured where supported by the protocol version.

Maximum configurable MQTT session expiry duration.

Indicates support for MQTT topic-filter wildcards.

Indicates support for MQTT shared subscription functionality.

Indicates support for MQTT subscription identifiers.

Indicates support for MQTT Topic Alias functionality.

Maximum MQTT packet size supported by the implementation where declared by the manufacturer.

Application payload encodings or formats directly supported by the MQTT implementation.

Indicates that current MQTT broker connection status can be monitored or diagnosed.

Indicates automatic reconnection to an MQTT broker after loss of communication.

Indicates that the delay between MQTT reconnection attempts can be configured.

Minimum configurable delay between MQTT reconnection attempts.

Maximum configurable delay between MQTT reconnection attempts.

Indicates that application messages can be buffered locally while an MQTT broker connection is unavailable.

Indicates support for the Eclipse Sparkplug B specification over MQTT.

Horizontal physical pixel pitch of the display panel.

Vertical physical pixel pitch of the display panel.

Indicates that an ambient-light sensor is integrated into the product.

Installation and runtime display orientations supported by the HMI.

Indicates a manufacturer-supported touchscreen mode suitable for operation with gloves.

Indicates that the touchscreen can be operated using a manufacturer-approved stylus.

Indicates that the HMI front surface includes protective glass.

Physical thickness of the protective front glass.

Manufacturer-declared pencil-hardness grade of the touchscreen or protective front surface.

Indicates that the display front surface has an anti-glare treatment.

Indicates presence of an optical anti-reflective coating on the display front surface.

Indicates availability of a software numeric keyboard on the HMI display.

Indicates availability of a software alphanumeric keyboard on the HMI display.

Indicates that an audio speaker is integrated into the HMI.

Indicates that the product provides a physical audio output for an external speaker or audio device.

Indicates that local HMI interaction can be locked using a supported runtime or system mechanism.

Indicates support for a display screen saver after a configurable period of inactivity.

Indicates that automatic display dimming after inactivity can be configured.

Configured or manufacturer-declared inactivity period before automatic display dimming.

Indicates that the HMI display or backlight can enter a reduced-power or switched-off state while the HMI remains operational.

Indicates that the inactivity period before display power saving can be configured.

Configured or manufacturer-declared inactivity period before display power saving is activated.

Indicates support for Unicode text in HMI visualization projects.

Indicates that project-specific or configurable fonts can be managed by the HMI runtime.

Indicates support for reusable graphical symbol libraries.

Indicates support for dynamic graphical object animation based on process values or runtime conditions.

Indicates that sets of process parameters can be stored, edited and transferred as recipes.

Indicates that recipe definitions or recipe records can be imported.

Indicates that recipe definitions or recipe records can be exported.

Storage locations supported for recipe records.

Indicates support for configurable runtime alarms and alarm processing.

Indicates support for notifying users or external systems about runtime alarms.

Notification channels supported for runtime alarm notifications.

Indicates that selected alarms can be temporarily shelved or deferred.

Indicates support for suppressing alarms according to configured process conditions.

Indicates support for filtering alarm displays by configured criteria.

Indicates that archived process values can be visualized as historical trends.

Storage locations supported for runtime historical process data.

Indicates that the runtime can generate reports from process, alarm, recipe or historical data.

Output formats supported for generated runtime reports.

Indicates that reports can be generated automatically according to a schedule.

Indicates that the runtime can print screens, reports, alarms or other supported runtime information.

Indicates support for user-defined runtime scripts.

Indicates that scripts can be triggered by runtime events, tag changes, alarms or operator actions.

Indicates that scripts can be executed according to a runtime schedule.

Indicates support for extending the visualization system with custom reusable graphical controls.

Indicates support for custom HMI controls based on web technologies such as HTML5, CSS or JavaScript.

Methods supported for transferring an HMI visualization project to or from the device.

Indicates that an engineering project can be downloaded to the HMI device.

Indicates that an HMI project or recoverable project data can be uploaded from the device.

Indicates that the installed HMI project can be backed up using a supported mechanism.

Indicates that an HMI project backup can be restored to the device.

Indicates that the process visualization can be accessed using web technologies.

Indicates that remote visualization can be accessed through a compatible HTML5 web browser.

Indicates that the product can expose its HMI display using a VNC server.

Indicates that the device can display or control another system using a VNC client.

Indicates that permission to operate the HMI remotely can be configured.

Indicates that remote clients can be restricted to monitoring without control operations.

Indicates that runtime user accounts can be created and managed.

Indicates that automatic logout after user inactivity can be configured.

Indicates support for a traceable audit log of relevant operator and system activities.

Indicates that operator actions such as value changes, login events or commands can be recorded.

Indicates that selected runtime operations can require an authenticated electronic signature.

Regions or markets for which the manufacturer declares regulatory or certification compliance of the product.

Certification, market-approval, or conformity marks applicable to the product.

Primary normative document or standard according to which the manufacturer classifies or assesses the product.

Additional normative documents and standards declared by the manufacturer as applicable to the product.

Indicates whether an official declaration of conformity is available for the product.

Indicates whether a separate manufacturer declaration concerning declared product characteristics or conformity is available.

Indicates whether a certificate relating to the declared certification or conformity of the product is available.

Identification number of the certificate relating to the product or its certified version.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Indicates whether the product falls within the scope of WEEE requirements for waste electrical and electronic equipment.

Mass of the product together with its individual packaging and the accessories included in it.

External horizontal dimension of the product's individual package.

External vertical dimension of the product's individual package.

External depth dimension of the product's individual package.

Design type of the product's individual or transport packaging.

Number of individual products contained in one packaging unit at the specified level.

Country of origin of the goods declared for customs or commercial purposes.

Country in which the product was manufactured or its principal manufacturing operation was performed.

Commodity code under the international Harmonized Commodity Description and Coding System.

Commodity code under the Combined Nomenclature of the European Union.