External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Primary material from which the product is manufactured.

Grade, alloy, class, or technical designation of the product's primary material.

Primary visually perceived colour of the product's external surface.

Designation of the product's primary surface colour according to the RAL colour system.

Type of final surface finish of the product determining its appearance and service properties.

Technological surface treatment applied to modify its protective, mechanical, or decorative properties.

Type of protective, functional, or decorative coating applied to the surface.

Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.

Method used to mechanically secure the product to a support, surface, or load-bearing structure.

Type of surface or supporting base to which the product may be fixed.

Permissible spatial orientation of the component during installation and operation.

Number of holes provided in the product for mechanical fixing.

Diameter of the hole provided for a fixing element used when mounting the product.

Distance between the centres of mounting holes in the horizontal direction.

Distance between the centres of mounting holes in the vertical direction.

Horizontal dimension of the mounting pattern between the outermost fixing points of the product.

Vertical dimension of the mounting pattern between the outermost fixing points of the product.

Size designation of the screw, bolt, or other threaded fastener used for mounting the product.

Designation of the thread provided in the product's mounting holes or fixing elements.

Tightening torque recommended or permitted for fasteners during product installation.

Indicates whether the required fasteners are included with the product.

Indicates whether the design provides for mounting equipment on a DIN rail.

Indicates whether equipment may be mounted directly to the mounting surface without an intermediate DIN rail.

Minimum free space required above the product for installation, cooling, or servicing.

Minimum free space required below the product for installation, cooling, or servicing.

Minimum free space required to the left of the product for installation or servicing.

Minimum free space required to the right of the product for installation or servicing.

Minimum free space required in front of the product for installation and normal operation.

Minimum free space required behind the product for installation and normal operation.

Maximum angle permitted by the manufacturer by which the product may deviate from the specified reference orientation during installation.

Indicates that multiple switching units forming the assembly are mounted on a common baseplate, mounting plate or common mechanical base.

Type of electrical current for which the product's main supply circuit is intended.

Voltage value assigned to the product by the manufacturer for specified application conditions and characteristics.

Operating-circuit voltage with reference to which the product's performance characteristics are specified.

Minimum voltage at which the manufacturer guarantees the intended operating mode of the product.

Maximum voltage at which continuous operation of the product is permitted under the conditions declared by the manufacturer.

AC frequency assigned to the product for normal operating conditions.

Lower limit of the electrical network or signal frequency at which product operation is permitted.

Upper limit of the electrical network or signal frequency at which product operation is permitted.

Current assigned to the product by the manufacturer for the declared operating and thermal conditions.

Current that the product can carry continuously under the manufacturer's declared conditions without exceeding permissible temperature rise.

Voltage with reference to which the product's insulation clearances and dielectric properties are specified.

Peak value of an impulse voltage of specified waveform that the product insulation must withstand without breakdown.

Test voltage applied to verify the dielectric strength of the product insulation.

Minimum permissible insulation resistance between the specified electrically separated parts.

Category characterizing the expected level of impulse overvoltages at the product's point of use.

Degree of pollution of the surrounding microenvironment considered when selecting insulation distances and product characteristics.

Class of protection against electric shock determined by the product design and protective connection method.

Motor technologies and motor types that the product is designed to control, start, protect or drive.

Electrical phase configurations of motors supported by the product.

Motor winding connection configurations supported by the product.

Minimum motor rated voltage supported by the product.

Maximum motor rated voltage supported by the product.

Minimum motor rated current supported by the product.

Maximum motor rated current supported by the product.

Minimum motor rated power supported by the product.

Maximum motor rated power supported by the product.

Minimum motor rated frequency supported by the product.

Maximum motor rated frequency supported by the product.

Minimum motor rated rotational speed supported by the product.

Maximum motor rated rotational speed supported by the product.

Minimum number of motor poles supported by the product.

Maximum number of motor poles supported by the product.

Minimum motor service factor supported or configurable for motor protection or control.

Maximum motor service factor supported or configurable for motor protection or control.

Motor starting methods that the product can provide or manage.

Motor rotation directions that the product can control.

Manufacturer-declared motor power associated with the stated operational voltage and utilization category. UI may display the value in kW.

Operational voltage associated with the stored rated motor power.

Utilization category to which the stored rated motor power applies.

Manufacturer-declared utilization category defining the load characteristics and switching conditions according to the applicable standard.

Conductor connection technology used specifically for the main power terminals of the switching device.

Minimum conductor cross-section accepted by the main power terminal.

Maximum conductor cross-section accepted by the main power terminal.

Manufacturer-declared tightening torque specifically for screw, bolt or clamp-type main power terminals.

Declared number of mechanical operating cycles that the product can perform without electrical switching load.

Declared number of electrical load-switching cycles under the conditions specified by the manufacturer.

Minimum control-circuit supply voltage supported by the product or electronic coil.

Maximum control-circuit supply voltage supported by the product or electronic coil.

Minimum AC control-circuit frequency supported by the electromagnetic or electronic coil.

Maximum AC control-circuit frequency supported by the electromagnetic or electronic coil.

Minimum manufacturer-declared coil operating voltage expressed as a percentage of rated control voltage Uc.

Maximum manufacturer-declared coil operating voltage expressed as a percentage of rated control voltage Uc.

Minimum declared drop-out voltage of the contactor coil expressed as a percentage of rated control voltage Uc, where a range is specified.

Maximum declared drop-out voltage of the contactor coil expressed as a percentage of rated control voltage Uc.

Apparent power consumed by an AC-operated control coil during pull-in or inrush.

Apparent power consumed by an AC-operated control coil in the sealed or holding state.

Active or DC power consumed by the contactor control circuit during pull-in or inrush.

Active or DC power consumed by the contactor control circuit in the sealed or holding state.

Manufacturer-declared current drawn by the control coil during initial energization.

Manufacturer-declared current drawn by the control coil in the sealed or holding state.

Conductor connection technology used specifically for the control-circuit terminals.

Minimum conductor cross-section accepted by the control-circuit terminal.

Maximum conductor cross-section accepted by the control-circuit terminal.

Manufacturer-declared tightening torque specifically for a screw-type control-circuit terminal.

Number of normally open main power contacts or main switching poles.

Number of normally closed main power contacts or main switching poles.

Number of main changeover contact systems where the device construction provides main changeover contacts.

Rated operational current Ie for utilization category AC-1 at the associated manufacturer-declared reference voltage.

Operational voltage associated with the stored AC-1 rated operational current.

Rated operational current Ie for utilization category AC-3 at the associated manufacturer-declared reference voltage.

Operational voltage associated with the stored AC-3 rated operational current.

Rated operational current Ie for utilization category AC-4 at the associated manufacturer-declared reference voltage.

Operational voltage associated with the stored AC-4 rated operational current.

Maximum manufacturer-declared current that the contact system can make under the stated operating conditions.

Maximum manufacturer-declared current that the contact system can break under the stated operating conditions.

Maximum manufacturer-declared mechanical operating frequency without regard to the electrical load.

Maximum manufacturer-declared switching frequency under the associated utilization category and load conditions.

Utilization category associated with the stored maximum electrical switching frequency.

Degree of enclosure protection against access to hazardous parts and ingress of solid objects and water, designated by the IP code.

IP degree of protection provided by the accessible front side of the product after its intended installation.

Class of enclosure resistance to external mechanical impacts designated by the IK code.

Indicates whether the declared ingress protection of the enclosure has been verified by certification or testing.

Method or level of protection of the user against direct contact with hazardous live parts.

IEC motor-starter short-circuit coordination type declared for combinations using the contactor.

Prospective short-circuit current associated with the declared motor-starter coordination rating.

Operational voltage associated with the declared motor-starter short-circuit coordination rating.

Manufacturer-declared permissible short-circuit current value for the product or assembly under specified conditions.

Minimum adjustable overload current setting.

Maximum adjustable overload current setting.

Smallest selectable increment of the overload current setting.

Standardized overload-relay trip classes supported or selectable by the product.

Indicates that the motor overload protection characteristic is specifically sensitive to single-phasing or phase-loss conditions through motor-current imbalance or an equivalent protection principle.

Indicates whether a local mechanical or electronic indicator shows that the circuit breaker has tripped protectively.

Indicates that an overload or thermal trip can be identified separately from other trip causes by a dedicated mechanical, visual or electronic indication.

Indicates that an instantaneous or short-circuit trip can be identified separately from overload and other trip causes.

Reset or restart modes supported after the condition that caused a trip, protection action, alarm or safety stop has been cleared.

Set of protection functions integrated into the product or provided by it in its normal intended configuration.

Indicates whether the device has a mechanism that ensures protective tripping independently of the operating element being held in the ON position.

Indicates whether the product has a local TEST button for the specified functional check of the device.

Indicates whether a manufacturer-specified method is provided for functional testing of circuit-breaker or trip-unit operation.

Indicates that suppression of the switching overvoltage generated by the control coil is integrated into the product.

Electrical suppression technology integrated in or explicitly supplied with the contactor control coil.

Indicates whether integrated overload protection of the connected circuit is provided.

Indicates that the complete starter incorporates short-circuit protective functionality.

Indicates that the mechanical interlock is physically integrated or included in the complete product rather than merely supported as an optional accessory.

Indicates that the product incorporates the auxiliary contacts, wiring or equivalent electrical function required for mutual electrical interlocking.

Number of normally closed auxiliary contacts dedicated to electrical interlocking between forward and reverse contactors.

Indicates that the control logic requires the motor to be stopped or the active direction contactor to be released before the opposite direction can be commanded.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Minimum relative air humidity permitted for the declared operating or test condition.

Maximum relative air humidity permitted for the declared operating or test condition.

Temperature at which the corresponding relative humidity value is specified or standardized.

Nature of the humidity conditions for which product operation or resistance is declared.

Indicates whether the permissible humidity value applies only to non-condensing conditions.

Maximum altitude above sea level at which the product may be installed without exceeding the declared conditions.

Indicates whether the permissible product load must be reduced as installation altitude increases.

Altitude above sea level above which the permissible product load must be reduced.

Indicates whether the product's resistance to vibration has been verified under the declared conditions.

Lower limit of vibration frequency applied or permitted in the relevant test.

Upper limit of vibration frequency applied or permitted in the relevant test.

Amplitude or test-method-specified acceleration of vibration applied during product testing.

Indicates whether the product's resistance to short-duration mechanical shocks has been verified.

Maximum acceleration generated during mechanical shock testing of the product.

Duration of an individual mechanical shock pulse during product testing.

Indicates whether the product supports installation or connection of specified auxiliary contacts.

Indicates whether one or more auxiliary contacts are included in the standard product configuration.

Number of normally open (NO) auxiliary contacts installed in or supplied with the product.

Number of normally closed (NC) auxiliary contacts installed in or supplied with the product.

Number of changeover auxiliary contacts installed in or supplied with the product.

Physical and functional assembly form of the motor starter, such as open starter, enclosed starter or combination starter.

Functional power, protection and control components supplied as part of the complete motor-starter assembly.

Indicates that the starter is supplied as an enclosed assembly rather than as open switching components only.

Indicates that the motor-starter switching, protection and control components are delivered as a manufacturer-assembled unit.

Indicates that internal power-circuit connections between starter components are factory wired.

Indicates that internal starter control-circuit wiring is factory completed.

Indicates that an electromechanical power contactor is incorporated into the complete starter assembly.

Indicates that a disconnecting or isolating switching device is incorporated into the starter assembly.

Indicates that the starter includes a transformer supplying the control circuit.

Number of individual contactor units incorporated into the complete switching assembly.

Indicates that the power connection links required to reverse the relevant phases are supplied as part of the reversing assembly.

Indicates that factory or kit control-circuit links required for the reversing and interlocking function are supplied with the product.

Indicates that the electrical power and/or control interconnections required for reversing operation are factory wired.

Indicates that the electromagnetic actuator is controlled by integrated electronics rather than a conventional direct coil connection only.

Indicates that one coil or electronic control module supports a manufacturer-declared wide control-voltage range.

Operator control functions physically available on the starter or its integrated local control station.

Operating and fault states indicated locally by lamps, LEDs, mechanical indicators or equivalent means.

Indicates whether direct manual operation of the product's main switching function is supported.

Indicates whether the product's main operating function can be controlled by a remote command.

Mechanical construction of a reversing contactor product or reversing contactor assembly.

Indicates that a delay between removal of one direction command and energization of the opposite direction can be configured.

Minimum configurable delay between forward and reverse operation.

Maximum configurable delay between forward and reverse operation.

Primary normative document or standard according to which the manufacturer classifies or assesses the product.

Additional normative documents and standards declared by the manufacturer as applicable to the product.

Indicates whether an official declaration of conformity is available for the product.

Indicates whether a certificate relating to the declared certification or conformity of the product is available.

Indicates whether the CE marking is applied to the product where applicable.

Indicates whether the UKCA marking is applied to the product where applicable.

Indicates whether the EAC marking is applied to the product where applicable.

Indicates whether the product has a declared UL Listed certification or recognition status.

Indicates whether the product has a declared UL Recognized certification or recognition status.

Indicates whether the cULus mark is applied to the product where applicable.

Indicates whether the manufacturer declares product compliance with IEC 60529.

Indicates whether the manufacturer declares product compliance with IEC 62262.

Indicates whether the product has been tested according to applicable methods of the IEC 60068 series.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Indicates whether the product falls within the scope of WEEE requirements for waste electrical and electronic equipment.

Compliance with IEC 60947-4-1 requirements applicable to electromechanical contactors and motor-starters.

Compliance with UL 60947-4-1 requirements applicable to contactors and motor-starters.