Panel Wiring Duct
Internal mounting duct for routing, guiding, separating, and retaining wires and cables inside electrical cabinets, distribution boards, and control systems.
A panel wiring duct is intended for organized routing of wires and cables between electrical devices, terminal blocks, and other components inside distribution assemblies, control cabinets, and automation systems.
The duct generally consists of a base and sidewalls, which may be solid, slotted, or formed as individual fingers. Slots allow individual conductors to leave the duct directly toward installed devices. Such construction is characterized by slot width, length, and pitch, as well as finger width and pitch.
The usable internal cross-sectional area defines the space available for conductors. Some versions additionally include retaining elements that prevent wires from falling out when the cover is removed and may use a flexible design for routing along a variable path.
Selection criteria include external dimensions, usable cross-section, number and dimensions of routed conductors, sidewall design, slot geometry, material, temperature and fire characteristics, mounting method, and declared compliance with applicable standards.
This subcategory includes slotted, finger-type, solid, and flexible wiring ducts for internal wiring of electrical panels and cabinets, as well as ducts with retaining elements and other accessories for conductor management.
Panel Wiring Duct
General6
Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.
Range of tasks and systems for which the manufacturer recommends the component.
Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.
Permissible installation location of the product: indoors, outdoors, in a technical area, or as part of equipment.
Environmental conditions under which installation and operation of the product are permitted.
Permissible spatial orientation of the component during installation and operation.
Dimensions9
External horizontal dimension of the product between its outermost lateral points.
External vertical dimension of the product from its lowest to its highest point.
External linear dimension of the product along its longitudinal direction or principal length axis.
Dimension of a material, part, or product between two opposite surfaces, measured in the thickness direction.
Available distance between the internal side surfaces of the enclosure.
Distance between the internal and external surfaces of the main enclosure wall.
Available distance between the internal top and bottom surfaces of the enclosure.
Usable internal cross-sectional area available for routed cables or conductors.
Mass of the product per unit length.
Capacity and Layout9
Design type of the wiring-duct sidewall determining how conductors inside the duct are retained and routed out.
Width of an individual slot in the sidewall of a panel wiring duct.
Longitudinal dimension of an individual slot in the sidewall of a panel wiring duct.
Distance between corresponding points of adjacent repeating slots in a panel wiring duct.
Width of an individual sidewall finger of a panel wiring duct between adjacent slots.
Distance between corresponding points of adjacent repeating fingers of a panel wiring duct.
Indicates the presence of an element intended to retain wires or cables inside a wiring duct or other cable-management system.
Design type of an element intended to retain wires or cables in the specified position.
Maximum number of cables or conductors that the manufacturer permits to be accommodated in the product under specified conditions.
Materials and Finish17
Primary material from which the product is manufactured.
Grade, alloy, class, or technical designation of the product's primary material.
Primary visually perceived colour of the product's external surface.
Designation of the product's primary surface colour according to the RAL colour system.
Type of final surface finish of the product determining its appearance and service properties.
Character of the surface microrelief and visual structure after manufacturing or finishing.
Technological surface treatment applied to modify its protective, mechanical, or decorative properties.
Type of protective, functional, or decorative coating applied to the surface.
Material or chemical basis of the coating applied to the surface of the product or one of its parts.
Thickness of the coating layer applied to the surface of the product or one of its parts.
Indicates whether the product material has properties that reduce its ability to ignite and propagate flame.
Indicates whether the product material is classified as halogen-free according to the characteristics declared by the manufacturer.
Indicates whether the product's primary material has electrical insulating properties and is intended to electrically separate conductive parts.
Indicates whether the material has properties that limit the accumulation of electrostatic charge on the surface.
Indicates whether the absence of silicone has been declared for materials or process substances associated with the product.
Indicates whether the product's primary material is recyclable within the waste streams intended for it.
Proportion of recycled-origin material in the product or the relevant part.
Mounting and Installation18
Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.
Method used to mechanically secure the product to a support, surface, or load-bearing structure.
Type of surface or supporting base to which the product may be fixed.
Size designation of the screw, bolt, or other threaded fastener used for mounting the product.
Designation of the thread provided in the product's mounting holes or fixing elements.
Tightening torque recommended or permitted for fasteners during product installation.
Indicates whether the required fasteners are included with the product.
Primary material of screws, bolts, nuts, rivets, and other product fasteners.
Indicates whether the intended installation of the product can be carried out without tools.
Indicates whether the product's mechanical position, dimension, or geometry can be adjusted using means provided by its design.
Indicates whether the product has regularly arranged mounting or functional perforations.
Number of holes provided in the product for mechanical fixing.
Diameter of the hole provided for a fixing element used when mounting the product.
Geometric shape of the hole intended for mechanical fixing of the product.
Distance between the centres of mounting holes in the horizontal direction.
Distance between the centres of mounting holes in the vertical direction.
Indicates whether the product can be shortened to the required length by the intended mechanical cutting method.
Indicates the ability of the product to bend or change shape within its design limits without loss of normal function.
Protection and Safety11
Indicates whether the material and coating are designed to withstand ultraviolet radiation.
Indicates whether the product materials retain their declared properties when exposed to the specified oils.
Indicates whether the product materials retain their declared properties when exposed to the specified coolants.
Groups of chemicals or environments whose effects the product can withstand under the declared conditions.
Indicates whether the product materials retain their declared properties when exposed to the specified cleaning agents.
Classification of a material according to its ability to ignite, sustain combustion, and cease burning under a specified test.
Temperature of the heated wire used when testing the material or product against an ignition source.
Test temperature at which the resistance of insulating material to deformation under ball pressure is assessed.
Indicates whether the material ceases self-sustained burning after the ignition source is removed under specified conditions.
Indicates whether the material or construction limits flame propagation in the specified test.
Indicates whether the product materials retain their declared properties when exposed to ozone.
Environmental Conditions9
Minimum ambient temperature at which normal operation of the product is permitted.
Maximum ambient temperature at which normal operation of the product is permitted.
Minimum ambient temperature permitted during storage of the product while not in operation.
Maximum ambient temperature permitted during storage of the product while not in operation.
Minimum ambient temperature at which the manufacturer permits installation of the product.
Maximum ambient temperature at which the manufacturer permits installation of the product.
Maximum relative air humidity permitted for the declared operating or test condition.
Indicates whether the product's resistance to vibration has been verified under the declared conditions.
Indicates whether the product's resistance to short-duration mechanical shocks has been verified.
Included Equipment1
Indicates whether wiring duct covers are included in the product's standard equipment.
Standards and Compliance23
Certification, market-approval, or conformity marks applicable to the product.
Primary normative document or standard according to which the manufacturer classifies or assesses the product.
Additional normative documents and standards declared by the manufacturer as applicable to the product.
Indicates whether an official declaration of conformity is available for the product.
Indicates whether a certificate relating to the declared certification or conformity of the product is available.
Indicates whether the CE marking is applied to the product where applicable.
Indicates whether the product has a declared UL Listed certification or recognition status.
Indicates whether the product has a declared UL Recognized certification or recognition status.
Indicates whether the product has a declared CSA certification or recognition status.
Indicates whether the product has a declared TÜV certification or recognition status.
Indicates whether the product has a declared VDE certification or recognition status.
Indicates the presence of an approval or certification for use of the product on railway rolling stock or in railway infrastructure.
Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.
Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.
Additional manufacturer information concerning standards, certificates, declarations, and limitations of the declared compliance scope.
Indicates declared compliance of the product with the applicable requirements of IEC 61084-1 for cable trunking and ducting systems for electrical installations.
Indicates declared compliance of the product with the applicable requirements of EN IEC 61084-1 for cable trunking and ducting systems for electrical installations.
Indicates declared compliance of the product with the applicable requirements of UL 1565 for wire positioning devices and wiring ducts.
Indicates declared compliance of the product with the applicable requirements of CSA C22.2 No. 18.5 for wire positioning devices and wiring ducts.
Indicates declared compliance of the material or product with the applicable requirements of EN 45545-2 concerning fire behaviour of materials and components used in railway vehicles.
Manufacturer-declared classification according to EN 45545-2, including the applicable requirement set and hazard level where such classification is specified.
Indicates declared compliance of the product with the applicable particular requirements of IEC 61084-2-1 for cable trunking and ducting systems intended for mounting on walls or ceilings.
Indicates declared compliance of the product with the applicable particular requirements of EN IEC 61084-2-1 for cable trunking and ducting systems intended for mounting on walls or ceilings.
Logistics10
Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.
Mass of the product together with its individual packaging and the accessories included in it.
External horizontal dimension of the product's individual package.
External vertical dimension of the product's individual package.
External depth dimension of the product's individual package.
Design type of the product's individual or transport packaging.
Number of individual products contained in one packaging unit at the specified level.
Country of origin of the goods declared for customs or commercial purposes.
Commodity code under the international Harmonized Commodity Description and Coding System.
Commodity code under the Combined Nomenclature of the European Union.