Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

Range of tasks and systems for which the manufacturer recommends the component.

Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.

Permissible installation location of the product: indoors, outdoors, in a technical area, or as part of equipment.

Environmental conditions under which installation and operation of the product are permitted.

Permissible spatial orientation of the component during installation and operation.

External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

External linear dimension of the product along its longitudinal direction or principal length axis.

Dimension of a material, part, or product between two opposite surfaces, measured in the thickness direction.

Transverse dimension of a product or its circular element measured through the centre between opposite points of the circumference.

Design type of an element intended to mechanically retain and organize wires or cables.

Maximum number of cables or conductors that the manufacturer permits to be accommodated in the product under specified conditions.

Minimum external diameter of a cable compatible with the specified entry system.

Maximum external diameter of a cable compatible with the specified entry system.

Primary material from which the product is manufactured.

Grade, alloy, class, or technical designation of the product's primary material.

Primary visually perceived colour of the product's external surface.

Designation of the product's primary surface colour according to the RAL colour system.

Type of final surface finish of the product determining its appearance and service properties.

Character of the surface microrelief and visual structure after manufacturing or finishing.

Technological surface treatment applied to modify its protective, mechanical, or decorative properties.

Type of protective, functional, or decorative coating applied to the surface.

Material or chemical basis of the coating applied to the surface of the product or one of its parts.

Thickness of the coating layer applied to the surface of the product or one of its parts.

Indicates whether the product material has properties that reduce its ability to ignite and propagate flame.

Indicates whether the product material is classified as halogen-free according to the characteristics declared by the manufacturer.

Indicates whether the product's primary material has electrical insulating properties and is intended to electrically separate conductive parts.

Indicates whether the material has properties that limit the accumulation of electrostatic charge on the surface.

Indicates whether the absence of silicone has been declared for materials or process substances associated with the product.

Indicates whether the product's primary material is recyclable within the waste streams intended for it.

Proportion of recycled-origin material in the product or the relevant part.

Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.

Method used to mechanically secure the product to a support, surface, or load-bearing structure.

Type of surface or supporting base to which the product may be fixed.

Size designation of the screw, bolt, or other threaded fastener used for mounting the product.

Designation of the thread provided in the product's mounting holes or fixing elements.

Tightening torque recommended or permitted for fasteners during product installation.

Indicates whether the required fasteners are included with the product.

Primary material of screws, bolts, nuts, rivets, and other product fasteners.

Indicates whether the intended installation of the product can be carried out without tools.

Indicates whether the product's mechanical position, dimension, or geometry can be adjusted using means provided by its design.

List of DIN rail profiles with which the product is mechanically compatible.

Mechanical force resisting unintended movement or release of a retained element.

Mechanical force generated by a clamping element to secure the product or connected part.

Number of holes provided in the product for mechanical fixing.

Diameter of the hole provided for a fixing element used when mounting the product.

Geometric shape of the hole intended for mechanical fixing of the product.

Distance between the centres of mounting holes in the horizontal direction.

Distance between the centres of mounting holes in the vertical direction.

Indicates whether the material and coating are designed to withstand ultraviolet radiation.

Indicates whether the product materials retain their declared properties when exposed to the specified oils.

Indicates whether the product materials retain their declared properties when exposed to the specified coolants.

Groups of chemicals or environments whose effects the product can withstand under the declared conditions.

Indicates whether the product materials retain their declared properties when exposed to the specified cleaning agents.

Classification of a material according to its ability to ignite, sustain combustion, and cease burning under a specified test.

Temperature of the heated wire used when testing the material or product against an ignition source.

Test temperature at which the resistance of insulating material to deformation under ball pressure is assessed.

Indicates whether the material ceases self-sustained burning after the ignition source is removed under specified conditions.

Indicates whether the material or construction limits flame propagation in the specified test.

Indicates whether the product materials retain their declared properties when exposed to ozone.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Minimum ambient temperature at which the manufacturer permits installation of the product.

Maximum ambient temperature at which the manufacturer permits installation of the product.

Maximum relative air humidity permitted for the declared operating or test condition.

Indicates whether the product's resistance to vibration has been verified under the declared conditions.

Indicates whether the product's resistance to short-duration mechanical shocks has been verified.

Certification, market-approval, or conformity marks applicable to the product.

Primary normative document or standard according to which the manufacturer classifies or assesses the product.

Additional normative documents and standards declared by the manufacturer as applicable to the product.

Indicates whether an official declaration of conformity is available for the product.

Indicates whether a certificate relating to the declared certification or conformity of the product is available.

Indicates whether the CE marking is applied to the product where applicable.

Indicates whether the product has a declared UL Listed certification or recognition status.

Indicates whether the product has a declared UL Recognized certification or recognition status.

Indicates whether the product has a declared CSA certification or recognition status.

Indicates whether the product has a declared TÜV certification or recognition status.

Indicates whether the product has a declared VDE certification or recognition status.

Indicates the presence of an approval or certification for use of the product on railway rolling stock or in railway infrastructure.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Additional manufacturer information concerning standards, certificates, declarations, and limitations of the declared compliance scope.

Indicates declared compliance of the product with the applicable requirements of UL 1565 for wire positioning devices and wiring ducts.

Indicates declared compliance of the product with the applicable requirements of CSA C22.2 No. 18.5 for wire positioning devices and wiring ducts.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Mass of the product together with its individual packaging and the accessories included in it.

External horizontal dimension of the product's individual package.

External vertical dimension of the product's individual package.

External depth dimension of the product's individual package.

Design type of the product's individual or transport packaging.

Number of individual products contained in one packaging unit at the specified level.

Country of origin of the goods declared for customs or commercial purposes.

Commodity code under the international Harmonized Commodity Description and Coding System.

Commodity code under the Combined Nomenclature of the European Union.