External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Length of the supply cable supplied with the product or permanently connected to it.

External width of the inline control and protection enclosure incorporated into a portable cable assembly.

External height of the inline control and protection enclosure incorporated into a portable cable assembly.

External front-to-rear depth of the inline control and protection enclosure incorporated into a portable cable assembly.

Primary visually perceived colour of the product's external surface.

Designation of the product's primary surface colour according to the RAL colour system.

Primary material from which the product is manufactured.

AC frequency assigned to the product for normal operating conditions.

Electrical network earthing systems with which the product may be used in the declared configuration.

Indicates whether measurement or cumulative metering of electrical energy is supported.

Type or system of mains plug integrated into the product or supplied as part of it.

Number of electrical socket outlets integrated into or supplied as part of the product.

Manufacturer-declared electrical power consumption while the product is energized but not actively switching the controlled load.

Indicates that the device measures or accumulates active electrical energy.

Indicates that the interval between periodic measurement records can be configured.

Minimum configurable interval between periodically stored measurement records.

Maximum configurable interval between periodically stored measurement records.

Nominal electrical input voltage for which the power conversion device is designed.

Minimum continuous input voltage within the manufacturer-declared operating input range.

Maximum continuous input voltage within the manufacturer-declared operating input range.

Maximum manufacturer-declared input current under the specified operating conditions.

Maximum active electrical power drawn by the device from its input source under manufacturer-declared conditions.

Electrical current type delivered at the product output.

Nominal output voltage delivered under manufacturer-declared operating conditions.

Continuous output current for which the product is rated under the specified operating conditions.

Maximum output current permitted or available under manufacturer-declared conditions.

Continuous rated active output power of the power conversion device.

Number of AC phases used by the electrical input of the product.

Electrical phase and neutral connection arrangement used at the AC input.

Indicates that a neutral conductor is required for the manufacturer-declared input connection.

Indicates that electrical energy consumed at the input can be accumulated or reported.

Indicates that electrical energy delivered through the output can be accumulated or reported.

EV conductive charging modes supported by the product according to the applicable IEC 61851 charging-mode classification.

Number of independent EV charging points, outlets or vehicle charging positions provided or directly controlled by the product.

Maximum number of EV charging points that can transfer charging power simultaneously.

Physical EV connection arrangement provided by the charging equipment, such as socket outlet, permanently attached charging cable, or both.

Indicates that the EV charging-current limit or charging-current setpoint can be configured.

Minimum manufacturer-supported configurable EV charging-current setting.

Maximum manufacturer-supported configurable EV charging-current setting.

Smallest manufacturer-supported increment of the configurable EV charging-current setting.

Indicates that a configurable maximum charging-power limit can be applied to the charging point or charger.

Minimum configurable EV charging-power limit supported by the product.

Maximum configurable EV charging-power limit supported by the product.

EV conductive charging connector systems provided or supported by the product.

Total number of physical EV charging connectors provided by the product.

Number of permanently attached EV charging cable assemblies supplied as part of the charging equipment.

Usable length of the permanently attached EV charging cable assembly.

Indicates that the permanently attached charging cable can be replaced as a service component.

Indicates support for the EV charging Control Pilot conductor and signalling function.

Indicates support for the Proximity Pilot or equivalent proximity-detection conductor/function in the charging interface.

Indicates support for PWM signalling on the EV charging Control Pilot interface.

Indicates that a physical electricity meter is integrated into the charging equipment or controller.

Indicates that electrical quantities or energy can be measured independently for individual charging points.

Indicates that energy transferred during an individual EV charging session can be measured or accumulated separately.

Indicates that a meter reading corresponding to the beginning of a charging transaction or session can be recorded or reported.

Indicates that a meter reading corresponding to the end of a charging transaction or session can be recorded or reported.

Indicates that electrical meter values can be periodically transmitted or reported to another device or backend system.

Minimum configurable interval between periodic meter-value reports.

Maximum configurable interval between periodic meter-value reports.

Indicates that metering data can be cryptographically signed or otherwise protected for authenticity and integrity verification.

Indicates that the Proximity Pilot circuit is used to encode or identify the allowable current capability of the charging cable assembly.

Maximum manufacturer-declared electrical output power available from one individual charging point or connector.

Maximum manufacturer-declared output current available from one individual charging point or connector.

Indicates that the cumulative number of charging sessions can be retained as an operating statistic.

Indicates that cumulative active EV charging time can be retained as an operating statistic.

Indicates that cumulative energy transferred toward connected EVs can be retained as a lifetime operating statistic.

Manufacturer-declared PWM frequency used on the EV Control Pilot signal where PWM signalling is implemented.

Minimum manufacturer-supported Control Pilot PWM duty-cycle value.

Maximum manufacturer-supported Control Pilot PWM duty-cycle value.

Indicates that the product detects and evaluates applicable electrical Control Pilot connection and charging states.

Indicates that the product can verify the expected diode behaviour of the applicable Control Pilot circuit.

Degree of enclosure protection against access to hazardous parts and ingress of solid objects and water, designated by the IP code.

Class of enclosure resistance to external mechanical impacts designated by the IK code.

Set of protection functions integrated into the product or provided by it in its normal intended configuration.

Classification of the device sensitivity to the waveform and nature of residual current, for example AC, A, F, or B.

Rated residual operating current IΔn at which the device protective function is required to operate under specified conditions.

Rated residual non-operating current IΔno below which the device is not required to operate under specified conditions.

Indicates whether the product has a local TEST button for the specified functional check of the device.

Indicates whether the device is capable of detecting smooth DC residual current as part of the specified protective or monitoring function.

Declared threshold value of DC residual current for the specified detection function.

Indicates whether integral overcurrent protection is provided for the relevant electrical circuit.

Indicates whether a separate compatible circuit breaker is required to provide the complete protective switching function.

Indicates whether the product provides a dedicated function for monitoring the condition of the protective conductor.

Indicates that the product incorporates protection against excessive internal, component or monitored temperature.

Indicates that an internal test or test function can be initiated remotely through a supported interface.

Indicates that the EV charging connector or socket can be mechanically or electrically locked during a charging session.

Primary mechanism used to retain or lock the EV charging connector.

Indicates that temperature of the EV charging connector, contacts or socket is actively monitored.

Indicates that temperature monitoring is provided within the permanently attached EV charging cable assembly.

Indicates that residual direct current detection functionality is integrated into the product rather than requiring a separate external RDC-DD.

Indicates that compliant operation requires a separate external residual direct current detecting device.

Maximum manufacturer-declared time between detection of the specified DC residual current condition and protective response.

Protective action performed when the dedicated DC residual-current detection threshold is exceeded.

Indicates that the RDC-DD function provides a dedicated electrical or logical fault-status output.

Indicates that the RDC-DD function monitors its own sensing or functional integrity.

Number of integrated temperature sensors used to monitor the charging connector, socket or current-carrying contact region.

Indicates that the product provides functionality intended to detect an unsafe open-PEN or equivalent PEN fault condition where applicable.

Methods used by the product or approved installation arrangement to detect or mitigate an open-PEN condition.

Indicates that the declared open-PEN protection arrangement requires a local earth electrode.

Indicates that temperature at the mains supply plug or plug-contact region is monitored to detect abnormal heating.

Number of temperature sensors monitoring the mains plug or its current-carrying contact region.

Indicates whether the material and coating are designed to withstand ultraviolet radiation.

Indicates whether the product is designed for the combination of weather influences specified by the manufacturer.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Maximum relative air humidity permitted for the declared operating or test condition.

Indicates whether the permissible humidity value applies only to non-condensing conditions.

Maximum altitude above sea level at which the product may be installed without exceeding the declared conditions.

Indicates that the charging socket or connector incorporates protective shutters over live-contact openings.

Indicates that a protective cap or cover for the EV charging connector is supplied with the product.

Indicates that the product incorporates a dedicated holster or docking holder for the charging connector.

Indicates that the equipment includes an integrated holder, hook or equivalent arrangement for storing the charging cable.

Indicates whether the product's main operating function can be controlled by a remote command.

Indicates whether the product has an integrated local display.

Indicates whether the product can store an internal event log.

Maximum number of event records that can be stored in the product's internal log.

Indicates whether an integrated real-time clock is provided for timekeeping, event time-stamping, or time-based functions.

List of supported digital data communication protocols.

List of supported physical or logical digital communication interfaces.

Indicates whether specified product settings can be read or changed remotely through a supported communication interface.

Indicates whether diagnostic information, status data, or fault information can be obtained remotely.

Indicates whether the product performs internal diagnostic checks to detect or report internal faults.

Indicates that device firmware can be updated by a manufacturer-supported procedure.

Indicates that the product can automatically test its internal monitoring or measuring functionality.

Indicates that an internal functional self-test can be initiated manually.

Indicates that device parameters and configuration data can be backed up to an external system or supported storage medium.

Indicates that previously stored device parameters or configuration data can be restored to the product.

Indicates that warning, fault, status or diagnostic information can be transmitted through a supported digital communication interface.

Indicates that one or more integrated or optional wireless communication technologies are supported.

Wireless communication technologies supported by the product.

Indicates manufacturer-supported communication with a cloud or remote Internet service.

Indicates that measurement, status or configuration data can be accessed through a documented application programming interface.

Application programming interface types supported by the product or its integrated communication service.

Indicates that firmware can be updated through a supported local or remote data communication interface.

Indicates that loss or inactivity of a communication link can be detected by an internal communication watchdog.

Indicates that access to network, web, API or remote configuration functions can require authenticated user credentials.

Indicates support for encrypted data communication through one or more manufacturer-supported communication services.

Transport Layer Security protocol versions supported for protected network communication.

Indicates that security-relevant events such as authentication failures or configuration access can be recorded.

Indicates that the device verifies the integrity or authenticity of executable firmware during startup.

Indicates that firmware update packages are cryptographically authenticated before installation.

Indicates that loss of an expected communication connection can generate a local or remote alarm or diagnostic condition.

Indicates that the installed firmware version can be read locally or through a supported digital communication interface.

Indicates that changes to configurable product parameters can be stored in an internal or remotely accessible log.

Indicates that accumulated operating statistics are available for diagnostics or maintenance.

Indicates that detected fault events can be accumulated in one or more internal counters.

Indicates support for reverting to an earlier compatible system firmware version.

Indicates presence of a redundant or backup system firmware image for recovery.

Indicates that corrupted or failed system firmware can be recovered using a manufacturer-supported mechanism.

Methods supported for authorizing an EV charging session.

Indicates that charging-session authorization can be completed using locally stored credentials or rules when the remote backend is unavailable.

Indicates that charging can be locally started or stopped using a physical control or local user interface.

Local methods used to indicate charging-point state, availability, charging progress or fault condition.

Indicates that the charging connector holder, connector area or cable termination includes status-related illumination.

Indicates that the charging socket area includes illumination to aid connection or indicate status.

Methods by which the product can be initially commissioned, configured or provisioned for operation.

Indicates that a guided commissioning workflow is available to assist with initial product configuration.

Indicates that supported installation parameters, connected devices or charging interfaces can be automatically detected or configured during commissioning.

Indicates that the product or commissioning software can validate configured installation parameters before normal operation is enabled.

Indicates that commissioning parameters, checks or results can be exported as a service or installation record.

Indicates that historical records of EV charging sessions can be retained locally or in an integrated logging subsystem.

Maximum number of charging-session records that can be retained by the product where manufacturer-declared.

Indicates that detailed product fault records can be stored separately from or in addition to the general event log.

Maximum number of retained fault records where a dedicated fault-history capacity is manufacturer-declared.

Indicates that stored event, fault, charging-session or diagnostic logs can be viewed through a supported remote interface.

Indicates that stored diagnostic, event or charging-session log data can be exported or downloaded remotely.

Indicates that a structured snapshot of relevant operating states, measurements and diagnostics can be captured for troubleshooting.

Indicates that diagnostic operating data can be automatically captured when a fault condition occurs.

Indicates that the product operating system, controller or charging application can be restarted through an authorized remote command.

Indicates that installation of an available firmware update can be scheduled for a defined maintenance or low-use period.

Indicates that an available firmware update can be postponed rather than installed immediately.

Indicates that the product can automatically restore a previously valid firmware image after an unsuccessful update or startup validation failure.

Indicates that a dedicated operating mode is available for authorized service, maintenance or diagnostic activities.

Indicates that an authorized service or diagnostic mode can be entered or used through a supported remote service connection.

Indicates whether the CE marking is applied to the product where applicable.

Compliance with Directive 2014/35/EU where applicable to the product.

Compliance with Directive 2014/30/EU on electromagnetic compatibility where applicable.

Compliance with IEC 61851-1 general requirements for electric vehicle conductive charging systems.

Compliance with IEC 61851-21-2 EMC requirements applicable to off-board electric vehicle charging systems.

Compliance with IEC 62196-1 general requirements for EV plugs, socket-outlets, vehicle connectors, vehicle inlets and applicable cable assemblies.

Compliance with IEC 62196-2 dimensional compatibility requirements for AC EV charging accessories.

Compliance with IEC 62955 requirements for residual direct current detecting devices used with applicable Mode 3 EV charging equipment.

Compliance with IEC 62752 requirements for in-cable control and protection devices used for Mode 2 charging.

Compliance with IEC 62893-3 requirements for AC charging cables used with charging modes 1, 2 and 3.

Mass of the product together with its individual packaging and the accessories included in it.

External horizontal dimension of the product's individual package.

External vertical dimension of the product's individual package.

External depth dimension of the product's individual package.

Calculated or declared external volume of the product's individual package.

Design type of the product's individual or transport packaging.

Primary materials from which the product packaging is made.

Mass of the empty packaging without the product and its accessories.

Number of individual products contained in one packaging unit at the specified level.

Indicates whether the packaging used is declared recyclable as secondary raw material.

Indicates whether the packaging is designed for reuse without changing its primary purpose.

Indicates whether the packaging is intended to be returned to the supplier, manufacturer, or another participant in the logistics chain.