Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Number of integrated physical USB ports provided by the product, including charging, data, communication or programming ports.

Number of physical USB Type-A ports.

Number of physical USB Type-C ports.

Primary material from which the product is manufactured.

Primary visually perceived colour of the product's external surface.

Primary material of the internal current-carrying part, bridge, busbar, or other conductive element of the product.

Material of the mechanical clamping element, such as a screw, spring, pressure plate, or clamping cage.

Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.

Method used to mechanically secure the product to a support, surface, or load-bearing structure.

Permissible spatial orientation of the component during installation and operation.

Type of electrical current for which the product's main supply circuit is intended.

Voltage value assigned to the product by the manufacturer for specified application conditions and characteristics.

AC frequency assigned to the product for normal operating conditions.

Minimum continuous input voltage within the manufacturer-declared operating input range.

Maximum continuous input voltage within the manufacturer-declared operating input range.

Conductor connection methods supported by the specified terminals or connection elements.

Minimum conductor cross-section permitted by the connection system within its general conductor-size range.

Maximum conductor cross-section permitted by the connection system within its general conductor-size range.

Total number of electrical connection points provided by the product.

Number of electrical connection points intended for incoming or supply-side connections.

Electrical connection technologies supported at the incoming or supply-side connection points of the product.

Manufacturer-declared tightening torque for an incoming or supply terminal.

Minimum output voltage available or permitted within the specified output operating range.

Maximum output voltage available or permitted within the specified output operating range.

Continuous output current for which the product is rated under the specified operating conditions.

Maximum output current permitted or available under manufacturer-declared conditions.

Continuous rated active output power of the power conversion device.

Manufacturer-declared power conversion efficiency at the specified operating point.

Input power consumed while the device is energized and operating without an external output load.

Manufacturer-declared electrical power consumption while the product is energized but not actively switching the controlled load.

Physical USB connector types provided by the product.

Functional role of the USB port, distinguishing charging-only operation from data-capable USB interfaces.

USB and vendor charging protocol families supported by the charging outputs.

Maximum manufacturer-declared output power available from one USB port under the specified operating conditions.

Maximum manufacturer-declared output current available from one USB port.

Minimum programmable output voltage available in USB Power Delivery PPS mode.

Maximum programmable output voltage available in USB Power Delivery PPS mode.

Maximum manufacturer-declared output current available in USB Power Delivery PPS mode.

Degree of enclosure protection against access to hazardous parts and ingress of solid objects and water, designated by the IP code.

Class of enclosure resistance to external mechanical impacts designated by the IK code.

Indicates whether the product material is classified as halogen-free according to the characteristics declared by the manufacturer.

Indicates whether the absence of silicone has been declared for materials or process substances associated with the product.

Set of protection functions integrated into the product or provided by it in its normal intended configuration.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Maximum relative air humidity permitted for the declared operating or test condition.

Maximum altitude above sea level at which the product may be installed without exceeding the declared conditions.

Indicates whether the product has a local visual or mechanical indicator of operating, fault, or end-of-life status.

Indicates support for Programmable Power Supply operation as part of USB Power Delivery.

Indicates support for USB Power Delivery Extended Power Range operation.

Indicates that multiple integrated USB charging ports can supply connected loads simultaneously.

Method used to allocate the available output power between multiple USB ports when more than one port is present.

Certification, market-approval, or conformity marks applicable to the product.

Indicates whether the CE marking is applied to the product where applicable.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Indicates whether documentation is included in the product's standard supply.

Mass of the product together with its individual packaging and the accessories included in it.

External horizontal dimension of the product's individual package.

External vertical dimension of the product's individual package.

External depth dimension of the product's individual package.

Calculated or declared external volume of the product's individual package.

Design type of the product's individual or transport packaging.

Primary materials from which the product packaging is made.

Mass of the empty packaging without the product and its accessories.

Number of individual products contained in one packaging unit at the specified level.

Indicates whether the packaging used is declared recyclable as secondary raw material.

Indicates whether the packaging is designed for reuse without changing its primary purpose.

Indicates whether the packaging is intended to be returned to the supplier, manufacturer, or another participant in the logistics chain.

Country of origin of the goods declared for customs or commercial purposes.

Commodity code under the international Harmonized Commodity Description and Coding System.