Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

Range of tasks and systems for which the manufacturer recommends the component.

Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.

External linear dimension of the product along its longitudinal direction or principal length axis.

Transverse dimension of a product or its circular element measured through the centre between opposite points of the circumference.

Manufacturer-declared product mass per unit length.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Manufacturer-declared nominal conductor cross-section assigned to the relevant connection system.

Nominal diameter of an individual metallic strand forming the conductor.

Overall nominal diameter of the conductive body before insulation or outer covering.

Physical construction of the current-carrying conductor, such as solid, stranded, compacted, bunched or segmented.

Construction or flexibility class assigned to the conductor, including applicable IEC conductor classes.

Number of individual metallic strands forming the electrical conductor.

Geometrical shape of the conductor cross-section.

Primary electrically conductive material used for the cable conductors.

Grade, alloy, class, or technical designation of the product's primary material.

Metallic surface finish or plating applied to the electrical conductor.

Manufacturer-declared material purity or principal-element content.

Permissible installation location of the product: indoors, outdoors, in a technical area, or as part of equipment.

Indicates the ability of the product to bend or change shape within its design limits without loss of normal function.

Manufacturer-declared or standardized installation and routing methods for which the cable is suitable. This describes how the cable itself may be laid or routed and is distinct from mounting_type used for mounting standalone products.

Minimum bend radius declared by the manufacturer at which installation or operation of the product is permitted without unacceptable damage.

Indicates that the cable is manufacturer-declared as suitable for direct burial in soil without an additional continuous cable duct or conduit.

Indicates suitability of the product for repeated dynamic flexing during operation, rather than only for bending during installation.

Maximum declared or qualified number of flexing cycles under the specified bend radius and test conditions.

Maximum manufacturer-declared pulling or installation force that may be applied to the product without mechanical damage.

Minimum manufacturer-declared bend radius for repeated dynamic flexing under the specified operating conditions.

Manufacturer-declared electrical conductivity of the material, expressed as percent IACS where this convention is applicable.

Electrical conductor roles for which the wire is manufacturer-declared, standardized or specifically identified as suitable.

Manufacturer-declared nominal DC resistance of the conductor at 20 °C, normalized to one kilometre of conductor length.

Maximum manufacturer-declared DC resistance of the conductor at 20 °C, normalized to one kilometre of conductor length.

Manufacturer-declared continuous current-carrying capacity under the stated reference installation and thermal conditions. Installation-dependent rating tables may require a future normalized structure.

Maximum manufacturer-declared conductor temperature permitted during continuous normal operation.

Maximum manufacturer-declared conductor temperature permitted under short-circuit conditions.

Manufacturer-declared short-circuit current withstand capability for a one-second duration under the specified thermal conditions.

Manufacturer-declared temperature coefficient describing the change in conductor electrical resistance with temperature.

Indicates that the cable outer construction is designed or qualified for enhanced abrasion resistance.

Indicates manufacturer-declared resistance to mechanical crushing or compressive loading under the applicable test conditions.

Environmental conditions under which installation and operation of the product are permitted.

Indicates manufacturer-declared resistance to water exposure under the applicable product or test conditions.

Indicates whether the product is designed for the combination of weather influences specified by the manufacturer.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Minimum ambient temperature at which the manufacturer permits installation of the product.

Maximum ambient temperature at which the manufacturer permits installation of the product.

Maximum relative air humidity permitted for the declared operating or test condition.

Indicates whether the material and coating are designed to withstand ultraviolet radiation.

Indicates whether the product materials retain their declared properties when exposed to the specified oils.

Groups of chemicals or environments whose effects the product can withstand under the declared conditions.

Manufacturer-declared tensile strength of the material for the specified material condition, grade, or temper.

Manufacturer-declared elongation at break or after fracture under the specified tensile-test conditions.

Manufacturer-declared compliance of the conductor construction, nominal cross-section and resistance characteristics with IEC 60228 or its applicable EN adoption.

Certification, market-approval, or conformity marks applicable to the product.

Indicates whether the CE marking is applied to the product where applicable.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Mass of the product together with its individual packaging and the accessories included in it.

External horizontal dimension of the product's individual package.

External vertical dimension of the product's individual package.

External depth dimension of the product's individual package.

Calculated or declared external volume of the product's individual package.

Design type of the product's individual or transport packaging.

Primary materials from which the product packaging is made.

Mass of the empty packaging without the product and its accessories.

Number of individual products contained in one packaging unit at the specified level.

Indicates whether the packaging used is declared recyclable as secondary raw material.

Indicates whether the packaging is designed for reuse without changing its primary purpose.

Indicates whether the packaging is intended to be returned to the supplier, manufacturer, or another participant in the logistics chain.

Country of origin of the goods declared for customs or commercial purposes.

Commodity code under the international Harmonized Commodity Description and Coding System.