Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

Range of tasks and systems for which the manufacturer recommends the component.

Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.

External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

External linear dimension of the product along its longitudinal direction or principal length axis.

Dimension of a material, part, or product between two opposite surfaces, measured in the thickness direction.

Transverse dimension of a product or its circular element measured through the centre between opposite points of the circumference.

Distance between the internal and external surfaces of the main enclosure wall.

Nominal internal diameter of the metallic tubular ferrule sleeve before crimping.

Nominal external diameter of the metallic tubular ferrule sleeve before crimping.

Axial length of the plastic insulating collar of an insulated or twin ferrule.

Maximum outside diameter of the plastic insulating collar of an insulated or twin ferrule.

Primary material of the internal current-carrying part, bridge, busbar, or other conductive element of the product.

Grade, alloy designation, or other declared material designation of the main current-carrying part.

Metallic plating of the principal current-carrying part, different from its base material.

Thickness of the coating layer applied to the surface of the product or one of its parts.

Type of final surface finish of the product determining its appearance and service properties.

Indicates whether functional or protective electrical insulation is provided over all or part of the conductive surface of the product.

Primary electrical insulation material applied to or integrated with the conductive part of the product.

Color of the primary electrical insulation layer surrounding the conductor.

Extent of electrical insulation coverage over the conductive part of the product.

Indicates whether the product material is classified as halogen-free according to the characteristics declared by the manufacturer.

Indicates whether the absence of silicone has been declared for materials or process substances associated with the product.

Manufacturer-declared nominal conductor cross-section assigned to the relevant connection system.

Minimum conductor cross-section permitted by the connection system within its general conductor-size range.

Maximum conductor cross-section permitted by the connection system within its general conductor-size range.

Conductor materials for which the specified terminals and connection methods are designed.

Conductor construction classes permitted by the product's electrical connection system.

Conductor connection methods supported by the specified terminals or connection elements.

Minimum conductor stripping length specified by the manufacturer.

Maximum conductor stripping length specified by the manufacturer.

Minimum bare conductor diameter accepted by the connection system where the manufacturer specifies compatibility by conductor diameter.

Maximum bare conductor diameter accepted by the connection system where the manufacturer specifies compatibility by conductor diameter.

Mechanical barrel style of a crimp termination, such as open-barrel or closed-barrel.

Manufacturing construction of the crimp barrel, such as seamless or seamed.

Manufacturer-declared crimp geometry or die profile used to form the electrical connection.

Axial length of the conductor crimp barrel or crimping zone.

Manufacturer tool family, tool model or tooling system declared compatible with the crimp termination.

Manufacturer designation of the crimp die, insert or die set required for the declared crimp.

Minimum manufacturer-declared axial pull-out force of the completed crimp connection under the specified test conditions.

Test voltage applied to verify the dielectric strength of the product insulation.

Minimum permissible insulation resistance between the specified electrically separated parts.

Classification of a material according to its ability to ignite, sustain combustion, and cease burning under a specified test.

Temperature of the heated wire used when testing the material or product against an ignition source.

Indicates whether the material ceases self-sustained burning after the ignition source is removed under specified conditions.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Environmental corrosivity category for which resistance of the product material or protective coating is declared.

Duration of salt-spray testing withstood by the product or coating under the declared conditions.

Number of separate conductor insertion entries provided by the termination accessory.

Primary mechanical form of the terminal mating or connection portion.

Indicates that the crimp barrel or sleeve includes a physical stop controlling conductor insertion depth.

Indicates that the termination provides an opening or window for visual verification of conductor insertion.

Indicates whether conductor insulation must be removed before the conductor is inserted or terminated in the connector.

Primary normative document or standard according to which the manufacturer classifies or assesses the product.

Additional normative documents and standards declared by the manufacturer as applicable to the product.

Indicates whether the product has a declared UL Listed certification or recognition status.

Indicates whether the product has a declared UL Recognized certification or recognition status.

Indicates whether the product has a declared CSA certification or recognition status.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Manufacturer-declared compliance with IEC 60352-2 requirements for solderless crimped connections where applicable.

Manufacturer-declared compliance with UL 486F requirements for bare and covered ferrules where applicable.

Manufacturer-declared compliance with CSA C22.2 No. 291 requirements for wire ferrules where applicable.

Manufacturer-declared compliance with DIN 46228-4 for tubular wire-end ferrules with plastic sleeve where applicable.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Number of individual products contained in one packaging unit at the specified level.

Design type of the product's individual or transport packaging.

Country of origin of the goods declared for customs or commercial purposes.

Commodity code under the international Harmonized Commodity Description and Coding System.

Commodity code under the Combined Nomenclature of the European Union.