Commercial or technical designation of a manufacturer's product family sharing a common design and compatible characteristics.

Range of tasks and systems for which the manufacturer recommends the component.

Primary function of the device and its intended use as defined by its design and the manufacturer's documentation.

Permissible installation location of the product: indoors, outdoors, in a technical area, or as part of equipment.

Environmental conditions under which installation and operation of the product are permitted.

Manufacturer or functional designation of the industrial machine type.

External horizontal dimension of the product between its outermost lateral points.

External vertical dimension of the product from its lowest to its highest point.

External distance between the foremost and rearmost surfaces of the product.

Mass of the product itself, excluding transport packaging, additional accessories, and external equipment.

Number of principal electric motors integrated in the machine.

Primary material from which the product is manufactured.

Grade, alloy, class, or technical designation of the product's primary material.

Primary visually perceived colour of the product's external surface.

Type of final surface finish of the product determining its appearance and service properties.

Installation arrangement permitted by the product design, such as wall-mounted, flush-mounted, floor-mounted, or another specified mounting type.

Method used to mechanically secure the product to a support, surface, or load-bearing structure.

Permissible spatial orientation of the component during installation and operation.

Type of electrical current for which the product's main supply circuit is intended.

Voltage value assigned to the product by the manufacturer for specified application conditions and characteristics.

Current assigned to the product by the manufacturer for the declared operating and thermal conditions.

AC frequency assigned to the product for normal operating conditions.

Number of phases of the electrical system for which the product is designed to be connected or used.

Configuration of live and neutral conductors of the electrical system supported by the product.

Rated active electrical power of the product declared by the manufacturer for specified operating conditions.

Manufacturer-declared rated electrical input power consumed by the product at the specified operating point.

Manufacturer-declared rated apparent power of the electrical load.

Manufacturer-declared rated reactive power of the electrical load where applicable.

Manufacturer-declared power factor of the load at the specified operating point.

Peak input current occurring during energization or startup of the device.

Manufacturer-declared duration associated with the specified input inrush current.

Electrical power consumed by the product itself in the declared normal operating mode.

Manufacturer-declared electrical power consumption while the product is energized but not actively switching the controlled load.

General operating duty of the electrical load, such as continuous, intermittent or cyclic.

Fraction of a repeating operating period during which the load is energized or actively operating.

Indicates whether a neutral conductor connection is required for the product to perform its intended electrical or electronic functions.

Indicates that connection to protective earth is required for the declared electrical safety or operating conditions.

Indicates whether a supply cable is permanently connected to the product or supplied with it.

Length of the supply cable supplied with the product or permanently connected to it.

Manufacturer-declared standard or type designation of the supply cable fitted to or supplied with the product.

Indicates whether the supply cable can be replaced in accordance with the procedure specified by the manufacturer.

Type or system of mains plug integrated into the product or supplied as part of it.

Conductor connection methods supported by the specified terminals or connection elements.

Minimum conductor cross-section permitted by the connection system within its general conductor-size range.

Maximum conductor cross-section permitted by the connection system within its general conductor-size range.

Tightening torque specified by the manufacturer for a screw or bolted terminal connection.

Sum of rated power of the machine electric motors.

Voltage applied to the control circuit to perform the product's intended functions.

Type of current used in the product's control circuit.

Rated external auxiliary supply voltage required for the product's active functions.

Type of current and source used for the product's auxiliary supply.

Degree of enclosure protection against access to hazardous parts and ingress of solid objects and water, designated by the IP code.

Class of enclosure resistance to external mechanical impacts designated by the IK code.

Class of protection against electric shock determined by the product design and protective connection method.

Indicates that the manufacturer or design specification recommends supplying the load from a dedicated final circuit.

Manufacturer- or design-recommended rated current of the upstream protective device.

Recommended upstream overcurrent or combined protective-device technology for the load.

Recommended instantaneous/time-current characteristic of an upstream circuit breaker where declared.

Indicates that residual-current protection is explicitly required by the product or circuit specification.

Recommended residual-current device sensitivity technology such as AC, A, F or B where explicitly specified.

Indicates that a physical emergency-stop button is integrated into the charging equipment.

Minimum ambient temperature at which normal operation of the product is permitted.

Maximum ambient temperature at which normal operation of the product is permitted.

Minimum ambient temperature permitted during storage of the product while not in operation.

Maximum ambient temperature permitted during storage of the product while not in operation.

Maximum relative air humidity permitted for the declared operating or test condition.

Indicates that compressed air is required for normal machine operation.

Minimum atmospheric pressure at which normal operation of the product is permitted.

Maximum atmospheric pressure at which normal operation of the product is permitted.

List of supported physical or logical digital communication interfaces.

Number of integrated physical Ethernet communication ports.

Indicates that one or more integrated or optional wireless communication technologies are supported.

Indicates whether the CE marking is applied to the product where applicable.

Indicates whether product compliance with applicable RoHS restrictions on hazardous substances has been declared.

Indicates whether the manufacturer declares compliance of the product with applicable REACH Regulation requirements.

Indicates whether the product falls within the scope of WEEE requirements for waste electrical and electronic equipment.

Compliance with applicable IEC 60204-1 requirements for electrical equipment of machines.